Home › Category Archives › model

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys. Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the. Fuel tank pipe, and install the three No. 5 batteries to close the bottom. Fill the fuel tank with gasoline (95#). When the filling is completed. Make sure there is no air in the oil pipe. On the right side of the engine installation of the flying hammer. Turn, its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine. Counterclockwise on the right side of the engine installing the flying. If the ignition device is normal and the cylinder is under normal. Compression, if the machine still does not start normally, it is very likely. That the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start. The flywheel, This can be done several times to make the mixing ratio of. Gasoline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. 1x Eachine ET6 Model. 1x Engine Spare Parts Start Device. The item “New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade” is in sale since Tuesday, August 11, 2020. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “sunrise.shop” and is located in China Or Hong Kong . This item can be shipped worldwide.
  • Model: ET6
  • Country/Region of Manufacture: China
  • Year: 2020
  • Itinerary: 20MM
  • MPN: Eachine ET6
  • Size: 180*125*125MM
  • Weight: 1610G
  • Material: Brass And Stainless Steel
  • Displacement: 6CC
  • Cylinder diameter: 22MM
  • Age Level: 8-11 Years
  • Brand: Eachine

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Model Hit and Miss Engine ET1 Stem Upgrade Model

Listed as used but only been taken out of the box, as new condition, very nicely made model hit and miss petrol engine, latest upgraded version of this engine. Includes pull cord start rope. I would suggest this is not suitable for young children as petrol and high voltage ignition is involved, requires batteries and a degree of patience as fuel control is critical and very sensitive, enthusiast recommended, not suitable for young children or unsupervised children. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Petrol or lighter fluid. Tappet clearance: 0.5mm. The item “Model Hit and Miss Engine ET1 Stem Upgrade Model” is in sale since Saturday, October 17, 2020. This item is in the category “Toys & Games\Educational Toys\Other Educational Toys”. The seller is “dale7707″ and is located in Peterborough. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, El salvador, Trinidad and tobago, Uruguay.
  • Type: Educational Toys
  • Brand: Eachine

Model Hit And Miss Engine From Bar Stock

Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

This is a model that is based on a 2-1/2 horsepower Vertical gear less, engine built in the 1890′s. It incorporates a pendulum type governor, igniter ignition, and a fuel pump all without the use of gears. This is accomplished with a notched cam with a ratchet wheel, advanced simply by eccentric movement. All of these functions are miniaturized for you, in detail in a fully operational model engine. Runs on common Gasoline. Model engine specifications, are 1-3/4″ bore, 2-1/4′ stroke, 12-1/16″ diameter flywheels. Engine height finished 22-1/2, weight 80 pounds as shown in the photo of the finished engine. This is a 4/10 scale of a full size engine. The hobbyist or person with mechanical skills can assemble this model. It requires painting, polishing, assembly, and a wood base. No machining is necessary. Kit includes, assembly and operational DVD, complete set of machined parts, all nuts, bolts, studs, cotter keys, and piping, name plate, complete fuel system, all ignition, and igniter parts, lubricators, with oilier and a grease cup. (UPS) Running examples can be seen on utube. The listing Photo shows a assembled finished Model engine. The item “Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc” is in sale since Monday, August 10, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “weplan” and is located in Zanesville, Ohio. This item can be shipped to United States.
  • Model: Hit and Miss Gas Engine
  • Country/Region of Manufacture: United States
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Debolt Machine Inc.
  • Powered By: Gas

Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

This is a model that is based on a 2-1/2 horsepower Vertical gear less, engine built in the 1890′s. It incorporates a pendulum type governor, igniter ignition, and a fuel pump all without the use of gears. This is accomplished with a notched cam with a ratchet wheel, advanced simply by eccentric movement. All of these functions are miniaturized for you, in detail in a fully operational model engine. Runs on common Gasoline. Model engine specifications, are 1-3/4″ bore, 2-1/4′ stroke, 12-1/16″ diameter flywheels. Engine height finished 22-1/2, weight 80 pounds as shown in the photo of the finished engine. This is a 4/10 scale of a full size engine. The hobbyist or person with mechanical skills can assemble this model. It requires painting, polishing, assembly, and a wood base. No machining is necessary. Kit includes, assembly and operational DVD, complete set of machined parts, all nuts, bolts, studs, cotter keys, and piping, name plate, complete fuel system, all ignition, and igniter parts, lubricators, with oilier and a grease cup. (UPS) Running examples can be seen on utube. The listing Photo shows a assembled finished Model engine. The item “Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc” is in sale since Sunday, August 2, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “weplan” and is located in Zanesville, Ohio. This item can be shipped to United States.
  • Model: Hit and Miss Gas Engine
  • Country/Region of Manufacture: United States
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Debolt Machine Inc.
  • Powered By: Gas

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT

This is an extremely hard to find original KW Model T 1-cylinder base mount magneto. It was used on the International Harvester Mogul 10-20 tractor, and possibly some other one-cylinder applications. It is in great shape with no cracks, breaks, or repairs that I can see or know of other than a chip out of the points housing which shouldn’t affect anythine a minor ding or two in the brass cover over the magnets which are strictly cosmetic. It is anti-clockwise or counter clockwise rotation and the impulse works as it should. It turns over very nicely and seems to have very little wear in the bearings or the impulse. Everything seems to work as it should. It has good magnetism and puts out a nice hot spark at the leadout. Everything inside the points cover looks to be in great shape. It mounts on a 2 inch square bolt pattern and the mounting threads are in great shape. These original KW magnetos are extremely hard to find in the wild or even at swap meets so if you’ve been looking for one for an authentic restoration here’s a very nice one. Let the pictures be your guide. I can deliver this for free (or a cold beverage) to Baraboo, WI, Portland, IN, or Coolspring, PA, later this year. I can be reached at 262 573 193 1 if you’d like to talk about it. The item “Old KW Model T IHC MOGUL 10-20 Tractor Magneto One Cylinder Hit Miss Engine HOT” is in sale since Tuesday, July 2, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in Waldo, Wisconsin. This item can be shipped worldwide.
  • Model: T
  • Country/Region of Manufacture: United States
  • MPN: Does Not Apply
  • Brand: KW
  • Country of Manufacture: United States

Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

This is a model that is based on a 2-1/2 horsepower Vertical gear less, engine built in the 1890′s. It incorporates a pendulum type governor, igniter ignition, and a fuel pump all without the use of gears. This is accomplished with a notched cam with a ratchet wheel, advanced simply by eccentric movement. All of these functions are miniaturized for you, in detail in a fully operational model engine. Runs on common Gasoline. Model engine specifications, are 1-3/4″ bore, 2-1/4′ stroke, 12-1/16″ diameter flywheels. Engine height finished 22-1/2, weight 80 pounds as shown in the photo of the finished engine. This is a 4/10 scale of a full size engine. The hobbyist or person with mechanical skills can assemble this model. It requires painting, polishing, assembly, and a wood base. No machining is necessary. Kit includes, assembly and operational DVD, complete set of machined parts, all nuts, bolts, studs, cotter keys, and piping, name plate, complete fuel system, all ignition, and igniter parts, lubricators, with oilier and a grease cup. (UPS) Running examples can be seen on utube. The listing Photo shows a assembled finished Model engine. The item “Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc” is in sale since Wednesday, July 22, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “weplan” and is located in Zanesville, Ohio. This item can be shipped to United States.
  • Model: Hit and Miss Gas Engine
  • Country/Region of Manufacture: United States
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Debolt Machine Inc.
  • Powered By: Gas

Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

This is a model that is based on a 2-1/2 horsepower Vertical gear less, engine built in the 1890′s. It incorporates a pendulum type governor, igniter ignition, and a fuel pump all without the use of gears. This is accomplished with a notched cam with a ratchet wheel, advanced simply by eccentric movement. All of these functions are miniaturized for you, in detail in a fully operational model engine. Runs on common Gasoline. Model engine specifications, are 1-3/4″ bore, 2-1/4′ stroke, 12-1/16″ diameter flywheels. Engine height finished 22-1/2, weight 80 pounds as shown in the photo of the finished engine. This is a 4/10 scale of a full size engine. The hobbyist or person with mechanical skills can assemble this model. It requires painting, polishing, assembly, and a wood base. No machining is necessary. Kit includes, assembly and operational DVD, complete set of machined parts, all nuts, bolts, studs, cotter keys, and piping, name plate, complete fuel system, all ignition, and igniter parts, lubricators, with oilier and a grease cup. (UPS) Running examples can be seen on utube. The listing Photo shows a assembled finished Model engine. The item “Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc” is in sale since Tuesday, April 21, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “weplan” and is located in Zanesville, Ohio. This item can be shipped to United States.
  • Model: Hit and Miss Gas Engine
  • Country/Region of Manufacture: United States
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Debolt Machine Inc.
  • Powered By: Gas

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog

Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog. Here is a nice little Coles Model Hit Miss Gas. Engine, with some interesting history. All of them beautifully made, and in working condition, to show the customers what they could have, once they built the engine. This engine is from that original in store display owned by the Coles. So this engine is the actual engine from the catalog, built by Coles for their store display and their catalog. Many photos to show its. I do not see any broken or repaired parts. The flywheels turn with no wobble or runout. The hit miss governor is either not working or latches out at a very high rate of speed. My son and I got it running and throttling nicely without it hit and missing. This cute little running engine with incredible history, will make a nice addition to your collection. Beer can shown in photos for size comparison. You are welcome to check the. Engine out in person. We are located in southeast. Michigan just north of Toledo Ohio. Call 734 755 3609. If you have any. Problems with your item, please. To let me know. I can not resolve an. I include numerous photos of my. Items and consider this a great. And your idea of condition may. So I let the. So you be the. Judge as to whether an item is. Sure that it will work for your. It is your choice. If it will make a good fit for. Your collection or will work. Thank you for taking the time. Be sure to check out. _gsrx_vers_841 GS 7.0.16 (841). The item “Model Hit Miss Actual Gas Engine From Coles Store Advertising Display & Catalog” is in sale since Friday, April 17, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “pludge” and is located in Carleton, Michigan. This item can be shipped to United States.
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Unbranded
  • Powered By: Gas

New! Model Hit and Miss Gas Engine Clutch Pulley Fully Functional

New! Model Hit and Miss Gas Engine Clutch Pulley Fully Functional

Cast iron and steel construction, fully functional, modeled after a Stickney 1-3/4 h. Can be engaged while the engine is running. The engine must be stopped to disengage. Made for a 5/8″ diameter shaft with a 3/16″ keyway. Has a allen head set screw over the keyway for easy installation. (Hidden when assembled on your engine) Outside diameter of the pulley has center radius crown to keep your flat belt centered. Pulley is 2-3/8″ diameter, 1-5/16″ wide. Professional workmanship, Made by Debolt Machine Inc. The item “New! Model Hit and Miss Gas Engine Clutch Pulley Fully Functional” is in sale since Tuesday, April 9, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “weplan” and is located in Zanesville, Ohio. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • MPN: SCP240626
  • Brand: Debolt Machine Inc