Home › Tag Archives › design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

I will be listing five engine models. Four of them like this one are spark ignition and run on gas. Be sure to check out my other listings as well. This little engine like a little swiss watch in quality it is about 3 inches tall, and therefore would be about 1/8 scale in comparison the atmospheric designs of the early 1900s. It is completely self contained, with water-cooling, electronic. Adjustable exhaust valve, and adjustable fuel mixer (carburetor). It can be easily started with the included rope pull (like and old lawn mower) or with an electric drill, using the included start extension. The crankcase, cylinder and head are made of brass. The cylinder has a steel liner, and the crankshaft and internals are steel as well. I have not run it. It comes with easy to understand starting instructions. It will need to have the crankcase willed the oil before you run it. Whomever buys it, will love it. The item “Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design” is in sale since Monday, September 6, 2021. This item is in the category “Toys & Hobbies\Models & Kits\Other Models & Kits”. The seller is “shipwright1950″ and is located in Blaine, Washington. This item can be shipped worldwide.
  • Scale: 1:8
  • MPN: Does Not Apply
  • Brand: Unbranded

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

I will be listing five engine models. Four of them like this one are spark ignition and run on gas. Be sure to check out my other listings as well. This little engine like a little swiss watch in quality it is about 3 inches tall, and therefore would be about 1/8 scale in comparison the atmospheric designs of the early 1900s. This one has a flyball. To control engine speed. It is completely self contained is air-cooled with electronic. Adjustable exhaust valve, and adjustable fuel mixer (carburetor). It can be easily started with the included rope pull (like and old lawn mower) or with an electric drill, using the included start extension. The crankcase, cylinder and head are made of brass. The cylinder has a steel liner, and the crankshaft and internals are steel as well. I have not run it. It comes with easy to understand starting instructions. It will need to have the crankcase willed the oil before you run it. Whomever buys it, will love it. The item “Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball” is in sale since Monday, September 6, 2021. This item is in the category “Toys & Hobbies\Models & Kits\Other Models & Kits”. The seller is “shipwright1950″ and is located in Blaine, Washington. This item can be shipped worldwide.
  • Scale: 1:8
  • MPN: Does Not Apply
  • Brand: Unbranded

Bob Shores Little Devil hit miss engine Kit (One of Bob’s last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

Bob Shores Little Devil hit miss engine Kit (One of Bob's last engine design)

We are in the process of reconditioning several Original engine patterns so we can continue to produce these classic engine casting kits. Some patterns are 30 years old and need TLC to produce the best castings possible so, please, be patient. Our goal is to provide the best casting kits and plan sets available for these “Classic Engines” from the past. Bob Shores Little Devil hit miss engine (One of Bob’s last engine design). First Time offered in Years.. The Little Devil vertical engine is intended to be a companion to the Little Angel horizontal engine. Preliminary specifications are: bore 5/8″, Height 4.5″, Width 3.9″ and flywheel diameter of 2 5/8″. The first step is, of course, to make preliminary drawings of the concept. The drawings are then modified to standard dimensions, drills, reams, gears, bearings and bolt sizes. This design and castings has been missing for years. We recovered the patterns and had new patterns made for the flywheels. Flywheels patterns were burned up in a foundry file but one of our original flywheel patterns for the other engines patterns so we had one of the original little Devil flywheels on it so we built up a new patterns for the small flywheels. This was originally built by Bob Shores as a water cooled design as seen in the last picture of Bob’s first construction. The patterns were moved around and ended up in the Bay area engine modelers club where plans were finished and refined with some cad drawings. A air cool version was also designed and built so this can also be built as a air cooled version. This casting kit and plans consists of. 2 castings (head and crankcase). 2 Brass Flywheels (RED or Yellow Brass). 9 cad type parts drawings printed. 4 supplemental drawings from BAEM. 13 pages of Builders Hints. These hints are written and with photos of some of the machining bob did while developing this engine. Hints will be included in this sale. This engine is for advanced beginner or intermediate builder. Aluminum high strength Alloy from restored original Patterns from Bob and Margaret Shores. All Items are tested and in good working order unless otherwise stated in the listing. Please READ THE LISTING CAREFULLY. All Sales are Final. I always try to respond quickly to Emails. If it isnt listed, it isnt included. The item “Bob Shores Little Devil hit miss engine Kit (One of Bob’s last engine design)” is in sale since Wednesday, May 8, 2019. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “airamp” and is located in Scottsdale, Arizona. This item can be shipped to United States.
  • Country/Region of Manufacture: United States

4 piece Main Bearing Set John Deere 3 HP Type E Hit Miss Gas Engine New Design

4 piece Main Bearing Set John Deere 3 HP Type E Hit Miss Gas Engine New Design

4 piece Main Bearing Set John Deere 3 HP Type E Hit Miss Gas Engine New Design

John Deere E 4 piece Main Bearing set for the E 3 hp engine. This is Lightning Magnetos New 4 Piece Design for the Main Bearing set. This new design allows both sides of the babbit to be put together without a gap in the bearing Includes instruction sheet. These are Made In The USA, Poured right here in my shop and CNC machined under sizes available measure your crankshaft! We refuse to use import sources to manufacture our specialty parts just to make a bit more profit like others do. Keep in mind these are aftermarket parts not made by john deere model numbers used only as a reference. The free listing tool. The item “4 piece Main Bearing Set John Deere 3 HP Type E Hit Miss Gas Engine New Design” is in sale since Friday, October 26, 2012. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “lightningmag” and is located in Ottertail, Minnesota. This item can be shipped worldwide.
  • Model: E, EP, EK
  • Country/Region of Manufacture: United States
  • MPN: AE220RT
  • Brand: Lightning Magneto

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

Hit and Miss Working Engine Model David Kerzel Design Educational, Science

The basic components arrive in a box with no instructions. I added the stained & varnished storage/mounting box, fuel tank brackets, and battery box details. The engine is ready to run. Inside of the mounting box is the ignition module and switched-battery box (4.5v, qty 3 batteries, not included). “Hiding” these components makes the outside presentation very clean. Kerzel began designing a single cylinder, liquid-cooled, Hit and Miss Engine from scratch in about 2001. After several prototypes, he photo-documented his design and posted-online, working drawings for fabrication, machining, and assembly of a working engine. Learn more about the development of this engine. 7.5L X 5W X 7.5H. The model features a battery box, solid-state ignition system to fire the spark plug. The workmanship of this Chinese-sourced model is outstanding. The timing gears, exhaust valve trip-mechanism, cylinder intake/exhaust valves, carburetor, muffler, governor system (controlling exhaust trip system) are all remarkable. The anodized finish is also outstanding. Recommended fuel is Lighter Fluid. I have another duplicate engine for my own use. I built two identical engines. My other engine starts easily, idles nicely, and accepts loads (hand pressure on flywheel rim) very well. I use 32:1 synthetic 2-stroke oil in the fuel and occasionally squirt some WD-40 in the bottom piston skirt area (while running) just to be safe with lubrication. This is a turnkey set-up for the hit and miss collector. I have a collection of FRANKLIN MINT cars, interesting automotive-related items, model an d vocational training (Hohm) engines, etc. Please contact me with any questions. The item “Hit and Miss Working Engine Model David Kerzel Design Educational, Science” is in sale since Tuesday, October 23, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “logsdot” and is located in Houston, Texas. This item can be shipped to United States.
  • Brand: Chinese-sourced
  • Product size: 7.5 x 5 x 7.5
  • Theme: Science
  • Materials: Aluminum, Brass, Steel
  • ISBN: Does not apply
  • Type: Hit & Miss
  • Product weight: 4 lb
  • Completeness: Never run; ready-to-go
  • MPN: Does Not Apply
  • UPC: 603305940721

4 piece Main Bearing Set John Deere 1.5 HP E Hit Miss Gas Engine New Design

4 piece Main Bearing Set John Deere 1.5 HP E Hit Miss Gas Engine New Design

4 piece Main Bearing Set John Deere 1.5 HP E Hit Miss Gas Engine New Design

John Deere E 4 piece Main Bearing set for the E 1.5 hp engine. This is Lightning Magnetos New 4 Piece Design for the Main Bearing set. This new design allows both sides of the babbitt to be put together without a gap in the bearing for the shims (less oil leakage) Includes instruction sheet. These are Made In The USA, Cast right here in my shop and CNC machined We refuse to use import sources to manufacture our specialty parts just to make a bit more profit like others do. Keep in mind these are aftermarket parts not made by john deere model numbers used only as a reference. The free listing tool. The item “4 piece Main Bearing Set John Deere 1.5 HP E Hit Miss Gas Engine New Design” is in sale since Tuesday, January 05, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “lightningmag” and is located in Ottertail, Minnesota. This item can be shipped worldwide.
  • Brand: Lightning Magneto
  • Model: E, EK, EP
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United States

Hit N Miss Engine Bar Stock Design Particulars