Vintage Industrial Thresher Hit-Miss Steam Gas Engine Flat Belt 6 wide. Used Endless Flat Belt. The Looped Length laid out is approx 23 feet 4 inches (approx 1/2 of 46 feet). It is 6 wide. There is some edge wear as expected. Last 2 photos show some area on the inside of the belt where it looks like a pulley “gouged” the belt (on the inside). Photos show it laid out to show condition. It is very dirty. Ref no C197 – 487.
Home
› Tag Archives › hit–miss
18Apr
Vintage Thresher Hit-Miss Engine 46′ Flat 6Belt Industrial Pulley Silage Blower
vintage
Comments Off
16Feb
Vintage Thresher Hit-Miss Engine Flat Belt Pulley 48′ X 6 W Industrial Endless
vintage
Comments Off
26Jan
Antique Vintage Grain Corn Grind Burr Mill Hit-Miss Gas Engine Flat Belt Pulley
antique
Comments Off
04Nov
Vintage Thresher Hit-Miss Engine 75′ Flat 7Belt Industrial Pulley Silage Blower
vintage
Comments Off
15Oct
Vintage steampunk Line Shaft Hit-Miss Engine Flat Belt Pulley 15-1/4 x 4-5/8
vintage
Comments Off
Vintage Industrial Hit-Miss Steam Gas Engine Flat Belt Pulley 15-1/4″ diameter 4-5/8″ wide. Used Flat Belt Pulley. Very heavy duty casting. Is 15-1/4 diameter at the edge. Face is 4-5/8 wide. Center hole is 1-3/16 diameter. Center hub width is approx 3-1/2 wide. Hub is offset to the one side. Has 1 drilled hole in the center hub, not threaded, and drilled at a slight inward angle. There is a heating discoloration across the flat surface. I assume this was done to help expand the casting when these pulleys were taken off years ago. I have another same pulley listed separately. That one has a shallow key-way & no drilled hole in the hub though.
12Sep
Vintage Thresher Hit-Miss Engine Flat Belt Pulley 48′ X 6 W Industrial Endless
vintage
Comments Off
20Jul
Vintage steampunk Line Shaft Hit-Miss Engine Flat Belt Pulley 4-1/2 W 4-7/8 D
vintage
Comments Off
Vintage Industrial Hit-Miss Steam Gas Engine Flat Belt Pulley 4-1/2″ wide x 4-7/8″ diameter. Used Flat Belt Pulley. Very heavy duty casting. Is 4-7/8 diameter at the edge without that riveted on belting in the measurement. The diameter with the riveted belting in the measurement is approx 5-3/16. Face is 4-1/2 wide. Center hole is 1-7/8 diameter. Center hub width is approx 2 wide. Hub is offset to the one side. Has a good cut key way. The lined riveted-on belting on the face is actually in fairly good condition.
16Jul
Vintage Thresher Hit-Miss Engine 39′ Loop Flat Belt Line Pulley 8 W Industrial
vintage
Comments Off
A neat ole item that needs a new home it is 8 wide and approx 39′ long, looped over, or 78′ if unlooped! Just a few spots that stand out a little but still very usable in my opinion! You be the judge! I sell mostly used or vintage items. I’m not expert on many things and cannot describe every detail, so look closely at pictures.
12Jul
Vintage steampunk Line Shaft Hit-Miss Gas Engine Flat Belt Pulley 16 x 2-1/2
vintage
Comments Off
Vintage Industrial Hit-Miss Steam Gas Engine Flat Belt Pulley 16″ diameter 2-1/2″ wide. Used Flat Belt Pulley. This is out of an old Amish Line Shaft Shop. Very heavy duty casting. Has great Steampunk appearance. Is 16 diameter at the edge. Face is 2-1/2 wide. Center hole is 1-1/4 diameter. Center hub width is approx 2-7/8 wide. Has 2 loose set screws.