Homeeachine › Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion. Use: Vehicles & Remote Control Toys. Technical parameters: Value 10. For Vehicle Type: Helicopters. Model Number: Eachine ET1. Tool Supplies: Assembled class. Remote Control Peripherals/Devices: Engine. Four-wheel Drive Attributes: Engine. RC Parts & Accs: Engine. Package Weight: 2.0kg 4.41lb. Package Size: 20cm x 10cm x 10cm (7.87in x 3.94in x 3.94in). Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. 1 X Eachine Hit & Miss Gas Engine. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We stand behind our products. We do our best to process as quickly as possible. Most orders are in transit for 30 days but some may take longer. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Sunday, May 5, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “foyerli” and is located in Shenzhen, China. This item can be shipped worldwide.
  • Use: Vehicles & Remote Control Toys
  • Material: Composite Material
  • Technical parameters: Value 10
  • For Vehicle Type: Helicopters
  • Brand Name: Eachine
  • Model Number: Eachine ET1
  • Tool Supplies: Assembled class
  • Remote Control Peripherals/Devices: Engine
  • Four-wheel Drive Attributes: Engine
  • RC Parts & Accs: Engine
  • Upgrade Parts/Accessories: Engine
  • MPN: Does not apply
  • Model: Does not apply
  • Brand: Does not apply

Comments are closed.