New Model EACHINE ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade. Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 1x Eachine ET6 Model. Please noted that your return product must be in their original packaging and the same condition as they were delivered. We usually respond within 12 hours. We guarantee that your issue will be solved quickly. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “besteey” and is located in this country: CN. This item can be shipped to United States, Australia.
- Model: EACHINE ET6 Engine
- Modified Item: No
- Country/Region of Manufacture: China
- Custom Bundle: No
- Size: 180*125*125MM
- Material: Brass And Stainless Steel
- Displacement: 6CC
- Weight: 1610G
- Itinerary: 20mm
- Type: Horizontal
- MPN: ET6
- Brand: EACHINE
- Powered By: Gas