Home › Category Archives › sumter

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

SUMTER B Magneto Hit Miss Engine Ignitor LAUSON FAIRBANKS MORSE OTTO Steam HOT

This is a very nice and very hard to find original Sumter B 2-bar magneto for a hit and miss or throttle governed gas engine. It should fit many engines but please measure your engine to be sure it will work for you. It is in great shape with no cracks, breaks, or repairs that I can see or know of other than a very nicely done reproduction “porcelain” insulator made from Delrin. It mounts on a 2 inch square hole pattern and the threads in all of the holes are in great shape. It turns over very nicely with very little noticeable wear in the bearings. This magneto has been disassembled, cleaned, and has had the magnets recharged. It has a nice hot spark that is sure to run your engine if it is set up properly. The pictures tell the story. It would also make a great spare on the shelf. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in this country: US. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Material: Various
  • Country of Manufacture: United States
  • Type: Magneto
  • MPN: B
  • Brand: Sumter

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

SUMTER AP MAGNETO LOW TENSION Hit and Miss Gas Engine BRASS BODY HOT 4 BOLT

Here is a very nice Sumter AP low tension magneto. This mag appears to be in great original condition. It produces a very nice hot spark. Please take a look at the pictures and decide if you need it. SPECIAL NOTE: This is a low tension magneto, it is meant to work with an igniter and will not produce at spark that will jump an air gap. It will not work with a spark plug. The spark it produces can be observed by rubbing a wire from the terminal against the case of the mag while turning the shaft. It does have to be timed to the engine. 2″ x 3-1/8″ mounting pattern on the bottom. The mounting holes have perfect threads. No wear can be felt. The gear is about 2-1/4 in diameter and has 16 teeth. I think this mag is ready to start and run your engine. This is a heavy mag, it weighs about 20 lbs before any box or packing material. I think I list items very accurately but my opinion on condition may differ from yours. In my opinion this is a great magneto. If you have any questions about how to use it on your engine please ask. Don’t be a clown and tear it all apart and then try to return it when you can’t get it to work. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in this country: US. This item can be shipped worldwide.
  • Engine Type: Hit & Miss
  • Material: Brass
  • Brand: Sumter

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE

Very hard to find Sumter No. 14 rotary magneto as used on the headless Fairbanks Morse Z engines and a few others. Magneto is in excellent rebuilt condition and has no wear in the bearings as it has been bushed. It has very little wear on the gear as can be seen. The gear is part number DJ142 and is for the headless Z engine. This magneto would also work on the 3hp Z with ignitor ignition and rotary magneto behind the hopper but the gear would have to be changed. I believe it will also work for the Plugoscillator engines but the base of the magneto would need to be changed. It has very hot spark as I’ve checked it. It mounts with two holes 3 7/8 inches apart on center. It has has a nice Sumter name band on it and is ready to go to work on an engine or put on your shelf a spare. These Sumter 14 magnetos are quite tough to find especially in this condition so don’t miss your chance if you need one for any reason. Let the pictures be your guide. You’ll like it. I can be reached at 262 573 193 1 if you’d like to talk about it. The item “SUMTER 14 FAIRBANKS MORSE Headless Z Hit Miss Gas Engine Magneto REBUILT NICE” is in sale since Wednesday, November 3, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in Waldo, Wisconsin. This item can be shipped worldwide.
  • Model: 14
  • Country/Region of Manufacture: United States
  • Material: Various
  • Country of Manufacture: United States
  • Type: Magneto
  • MPN: Does Not Apply
  • Brand: Sumter

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine

For your consideration is an original Sumter Magneto for a Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine. This is the style that uses the fork to trip the mag. This mag is HOT as in it has spark at the time of testing, this is verified in the last picture with me clipping a wire to the base and rotating the armature by hand (not a drill) touching the lead out and it produced the blue spark shown. The number on the base is 28356V. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr. The item “HOT! Sumter Magneto Fairbanks Morse Plug Oscillator Hit Miss Stationary Engine” is in sale since Sunday, November 21, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “jtfarmengines” and is located in Sherwood, Ohio. This item can be shipped worldwide.
  • Engine Type: Hit & Miss
  • Model: Magneto Fairbanks Morse Plug Oscillator
  • Brand: Sumter
  • MPN: Does Not Apply

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT

Here is a Sumter Jr magneto. This is a rare all brass body one. It makes a really hot spark and functions just as it should. The bearings only have a small amount of wear. Please take a look at the pictures and decide if you need it. SPECIAL NOTE: This is a low tension magneto, it is meant to work with an igniter and will not produce at spark that will jump an air gap. It will not work with a spark plug. The spark it produces can be observed by rubbing a wire from the terminal against the case of the mag while turning the shaft. It does have to be timed to the engine. 3/8 shaft for gear mounting. The mounting holes have nice threads. Only a small amount of wear. For questions 419 789 1159. I think I list items very accurately but my opinion on condition may differ from yours. In my opinion this is a great magneto. If you have any questions about how to use it on your engine please ask. Don’t be a clown and tear it all apart and then try to return it. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list. The item “SUMTER JR MAGNETO Hit and Miss Gas Engine MAG HOT HOT HOT” is in sale since Monday, September 20, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in Holgate, Ohio. This item can be shipped worldwide.
  • Engine Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Sumter

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work

Here is a Sumter Jr magneto. Its stuck and needs some work! The base is pretty much destroyed but those are available as reproductions. The armature looks good from what I can see. Please take a look at the pictures and decide if you need it. SPECIAL NOTE: This is a low tension magneto, it is meant to work with an igniter and will not produce at spark that will jump an air gap. It will not work with a spark plug. The spark it produces can be observed by rubbing a wire from the terminal against the case of the mag while turning the shaft. It does have to be timed to the engine. 3/8 shaft for gear mounting. The mounting holes have nice threads lol. Will need new base. For questions 419 789 1159. I think I list items very accurately but my opinion on condition may differ from yours. In my opinion this is a great magneto. If you have any questions about how to use it on your engine please ask. Don’t be a clown and tear it all apart and then try to return it. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list. The item “SUMTER JR MAGNETO Hit and Miss Gas Engine MAG NOT HOT Needs Work” is in sale since Friday, February 12, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in Holgate, Ohio. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Sumter

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702

Here is a nice looking Sumter Model 12 low tension magneto. It produces a very nice spark but it has more than a normal amount of wear. It may work fine as is but it will probably need rebushed. This mag is commonly used for a Fairbanks Morse Headless hit and miss engine. It is missing its name tag or band but that will not hurt its operation in any way and those are easy to get as reproductions if you want one. The base show signs of deterioration but those are also available as reproductions. Please take a look at the pictures and decide if you need it. For questions 419 789 1159. SPECIAL NOTE: This is a low tension magneto, it is meant to work with an igniter and will not produce at spark that will jump an air gap. It will not work with a spark plug. The spark it produces can be observed by rubbing a wire from the terminal against the case of the mag while turning the shaft. It does have to be timed to the engine. Nice reproduction aluminum base instead of the old pot metal one. 3/8 shaft for gear mounting. Has more than an average amount of wear and will probably need bushings. “AS IS” It mag work fine as is but it will probably need some work. I think I list items very accurately but my opinion on condition may differ from yours. In my opinion this is a great magneto. If you have any questions about how to use it on your engine please ask. Don’t be a clown and tear it all apart and then try to return it when you can’t get it to work. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list. The item “SUMTER MODEL 12 MAGNETO for HEADLESS FAIRBANKS MORSE Z Hit Miss Engine 176702″ is in sale since Wednesday, January 1, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in Holgate, Ohio. This item can be shipped worldwide.

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base

Sumter Electrical Low Tension Magneto. 2 hole mount – 2 center to center mount. Throws a nice blue spark. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items gasenginetom. The item “HOT Sumter Electrical Co. Low Tension Magneto Hit Miss Gas Engine Brass Base” is in sale since Saturday, March 14, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gasenginetom” and is located in Orient, Ohio. This item can be shipped worldwide.
  • Engine Type: Hit & Miss
  • Brand: Sumter

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine

12 Low Tension Magneto. 2 hole mount – 3 3/4 center to center mount. Throws a nice blue spark. Nice original RARE partin good condition ready to use. Gear part # DJ 142. Gear has 30 teeth and 3 1/8 Diameter. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items gasenginetom. The item “HOT Sumter Electrical Co. No. 12 Low Tension Magneto with GEAR Hit Miss Gas Engine” is in sale since Tuesday, December 10, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gasenginetom” and is located in Orient, Ohio. This item can be shipped worldwide.
  • Engine Type: Hit & Miss

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT

This is an extremely hard to find Sumter Model B rotary magneto for an old hit and miss or throttle governed gas engine. These were commonly used on John Lauson engines from the factory as well as options on IHC Famous and Titans and some of the earlier Fairbanks Morse and Foos engines. It is fresh from an old collectors estate and is in excellent condition with no cracks, breaks, or repairs of any kind except for slight chip/crack in the porcelain leadout and two cracked magnets which have little or no affect on its performance. It mounts on a 2 inch square hole pattern and the mounting threads in the brass base are in excellent shape. It has almost no noticeable wear on the armature bearings. I charged the magnets and it has excellent magnetic pull and great snapping spark! I believe this magneto is ready to go to work on an engine! Let the pictures be your guide and decide if you need it. The item “Old SUMTER B Hit Miss Gas Engine Magneto LAUSON IHC FAMOUS Steam Tractor HOT” is in sale since Tuesday, November 12, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in Waldo, Wisconsin. This item can be shipped worldwide.
  • Country of Manufacture: United States
  • Model: B
  • Country/Region of Manufacture: United States
  • Material: Various
  • MPN: Does Not Apply
  • Brand: Sumter