Here is a nice reproduction Fairbanks Morse pot muffler. This muffler would also work and look great for any engine with 1 1/2 NPT. Please check out the pictures and see if you need it. Approximately 10 1/2 tall. Approximately 7 1/2″ diameter on the ends and 11″ at the widest point. If I make a mistake on measurements or you feel something is not as described please let me know and I will try to make it right.
Here is a hot Wico EK magneto that will fit many different old engines. This mag has wear and will need a new bushing in the armature. It may be able to run an engine as it is but there is a good chance it may not. Please take a look at the pictures and decide if you need it. If you want to talk about it 419 789 1159. More wear than most. Hot Spark when tripped just right. It is missing its name tag but reproductions are easy to get. For Questions 419 789 1159. I think I list items very accurately but my opinion on condition may differ from yours. I have not had most of these mags apart and may not know what the inside looks like. If you want advice on how to use it please give me a call and I’ll be glad to help. Please do not be a clown and tear it all apart and then complain about something. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list.
Original Vintage Old Tall Matched Set Of 4 John Deere Cast Iron 5 Spoke Wheels Hit & Miss Gas Engine Maytag / Briggs Cart / Steam Punk Industrial Truck. They have the JD logo and part #J-1361-H cast on them. All four wheels are 9 3/4 dia. With a 1 1/2 face. They have a flat face makes for a nice cart. The axle hole is 1 3/4 dia. They have traces of John Deere green paint showing. Nice matched set to make a small to medium size engine truck for a Maytag / Briggs or other small hit & miss engine or your steam punk cart or table. Check out my other auctions for farm tractor, engine and machine collectibles!
I HAVE FOR YOUR CONSIDERATION AN ORIGINAL STEEL BATTERY BOX WITH THE ORIGINAL KNIFE SWITCH FOR A HIT MISS GAS ENGINE. I BELIEVE THIS WAS ORIGINAL TO THE FAIRBANKS AND MORSE MODEL Z GAS ENGINE LINE. THE LID IS MISSING. WE WILL TRY OUR BEST TO GIVE YOU AN ACCURATE AND HONEST DESCRIPTION OF THE ITEMS LISTING THE GOODS AND THE BAD’S. LET THE PICTURES PROVIDED BE YOUR GUIDE. PLEASE VIEW OUR ITEMS OFTEN SINCE WE WILL BE LISTING MORE HIT MISS GAS ENGINE PARTS AND ENGINES THROUGHOUT THE YEAR.
Mounting bolts are 2 1/8 on centers. No play in movable shaft. Springs are very good. Points are like new. Should be ready to use. I think this is for 4 Hp engines. Most of my item are old and I will try to do my best to give an accurate description.
Up for sale is this line shaft bearing, used in good condition, rusty but usable, all bolts should free up with some heat. Babbitt looks in good shape. Appears to be for a 1 1/2 diameter shaft. No cracks or repairs. See pictures for details.
These are about 70% larger than the small set. These cast iron bolsters take a lot of the work and all of the welding out of making a cart for your engine. One pair of stationary and a pivoting bolster with axle mounting hardware designed to work with axles 1 5/16″ to 2″ in diameter recommended for use on engines 4hp and up. A lot of you have bought wheels in the past with the idea of actually using them one day, well dig them out and dust them off (or leave the dust on) now is your chance to put them back to work even if they take different size axles, due to the design you can run any combination of 1 5/16″ to 2″diameter axles between the front and rear. Bolsters are 5 1/2″ tall and the width spacing between the mounting holes on the pivoting bolster base is 9 ¾”. Finished height of cart will vary depending on the diameter of the wheels used. Cast iron will give an antique look many prefer over fabricated strap steel and help your engine really stand out at the next show. Can of root beer for size comparison, not included. Photo of finished cart is for reference only, wheels engine etc are not included.
Piston, Rod and Cap for. Fairbanks Morse Z Dishpan Hit Miss. Came off of a 2hp Fairbanks Morse Z Dishpan Hit Miss. Cast iron painted red. 3 1/2 diameter piston. 4 1/4 long piston. Fits a 1 3/8 crank shaft. Has shims and grease cup. 14 1/2 long overall. 11 1/8 between center of crankshaft and wristpin. ZAA5B / Rod Part No. Good condition ready to use, with no breaks, cracks or welds. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are. I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine related items / gasenginetom.
Cast iron governor assembly with angled gear. It is not worn. It is missing the tin type bracket that goes over the end governor weights. Most of my item are old and I will try to do my best to give an accurate description.
Came from a local estate. Still retains some of its original red paint. Everything turns and is not froze up. The wire that comes off the top has no insulation on it as seen in the last photo. This will have to be fixed. I think it’s complete, but since I don’t know how this thing works I’m going to sell it as not working and for restoration or parts. Check the pictures as they are part of the description. Weight is over 24 pounds.
