Eachine EM1 Micro Engine Model Brass Double Piston Complete STEAM Engine Toys Collection Gifts. Brand: Eachine Name: EM1 Engine Model Size:104x99x70MM/4.06×3.87×2.73inch Displacement: 1.9cc. Cylinder diameter: 13MM/0.51inch Itinerary: 16MM/0.63inch Veight: 1200G This is a micro engine. It is made of brass and stainless steel Air-cooledcooling structure. Measurement Details in the attached picture. 1x Eachine EM1 Model. 100% brand new and high quality. Check the wiring of the engine from the bottom plate and install three AA batteries(4.5V) 2. Use gasoline(95#)to fill the fuel tank. When the filling is completed, press the carburetor port by hand on the right side of the engine(power switch surface), and turn the flywheel clockwise for many times. Its function can make the mixing Fuel fully enters the cylinder. Turn on the power switch and quickly turn the flywheel clockwise to start the engine on the right side of the engine(power switch surface). When the ignition device is normal and the cylinder compression is normal, if the machine cannot start normally, it is very likely that the carburetor oil needle needs to be adjusted. After tightening the main oil needle on the carburetor, loosen 1/4 turn and start the flywheel, so that the mixing ratio of gasoline and air can reach the normal working mixing ratio after seven times. When the machine stops, the power switch should be turned off. Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold” is in sale since Tuesday, January 12, 2021. This item is in the category “Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Engine, Exhaust & Fuel Systems\Petrol/Nitro Engines”. The seller is “drewer224″ and is located in Shenzhen. This item can be shipped worldwide.
- MPN: ljP3576564
- Brand: Unbranded/Generic
- Name:: EM1 Engine Model
- Size:: 104x99x70MM/4.06×3.87×2.73inch
- Displacement:: 1.9cc.
- Cylinder diameter:: 13MM/0.51inch
- Itinerary:: 16MM/0.63inch
- Veight:: 1200G
- Manufacturer Part Number: ljP3576564