Home › Category Archives › miniature

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design

I will be listing five engine models. Four of them like this one are spark ignition and run on gas. Be sure to check out my other listings as well. This little engine like a little swiss watch in quality it is about 3 inches tall, and therefore would be about 1/8 scale in comparison the atmospheric designs of the early 1900s. It is completely self contained, with water-cooling, electronic. Adjustable exhaust valve, and adjustable fuel mixer (carburetor). It can be easily started with the included rope pull (like and old lawn mower) or with an electric drill, using the included start extension. The crankcase, cylinder and head are made of brass. The cylinder has a steel liner, and the crankshaft and internals are steel as well. I have not run it. It comes with easy to understand starting instructions. It will need to have the crankcase willed the oil before you run it. Whomever buys it, will love it. The item “Miniature scale model Hit and Miss Engine Gas IC Engine 1911 Harley Design” is in sale since Monday, September 6, 2021. This item is in the category “Toys & Hobbies\Models & Kits\Other Models & Kits”. The seller is “shipwright1950″ and is located in Blaine, Washington. This item can be shipped worldwide.
  • Scale: 1:8
  • MPN: Does Not Apply
  • Brand: Unbranded

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball

I will be listing five engine models. Four of them like this one are spark ignition and run on gas. Be sure to check out my other listings as well. This little engine like a little swiss watch in quality it is about 3 inches tall, and therefore would be about 1/8 scale in comparison the atmospheric designs of the early 1900s. This one has a flyball. To control engine speed. It is completely self contained is air-cooled with electronic. Adjustable exhaust valve, and adjustable fuel mixer (carburetor). It can be easily started with the included rope pull (like and old lawn mower) or with an electric drill, using the included start extension. The crankcase, cylinder and head are made of brass. The cylinder has a steel liner, and the crankshaft and internals are steel as well. I have not run it. It comes with easy to understand starting instructions. It will need to have the crankcase willed the oil before you run it. Whomever buys it, will love it. The item “Miniature 1/8 scale model Hit and Miss Engine Gas IC Engine 1912 Design Flyball” is in sale since Monday, September 6, 2021. This item is in the category “Toys & Hobbies\Models & Kits\Other Models & Kits”. The seller is “shipwright1950″ and is located in Blaine, Washington. This item can be shipped worldwide.
  • Scale: 1:8
  • MPN: Does Not Apply
  • Brand: Unbranded

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Miniature Gas Engine Hit and Miss Hand machined

Flywheel is 5 inches in diameter well made all hand machined this guy made about 20 little gas engines. There must have been 100 hours of work put into this engine. Look how he put the points on behind the flywheel. Spark plug is missing hobby stores should have them. Terms of Sale: Items are Estate Sale/One of a Kind vintage pre-owned and used. An oversight or lack of knowledge on my part is not an attempt to deceive or mislead. The item “Miniature Gas Engine Hit and Miss Hand machined” is in sale since Monday, September 3, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “lmddmc” and is located in Shingle Springs, California. This item can be shipped to United States, Canada.
  • Brand: Unbranded
  • Model: hand machined
  • Material: Metal

Miniature Hit And Miss Engine Hand Made

Miniature Hit And Miss Engine Hand Made

Miniature Hit And Miss Engine Hand Made

Miniature Hit And Miss Engine Hand Made

Miniature Hit And Miss Engine Hand Made

Miniature Hit And Miss Engine Hand Made

This is A miniature hand made hit and miss engine. It is made from aluminum. Uses A coil, condenser, and battery for ignition. Battery with it is no good. 11″ long and 9″ wide. Uses camp lantern fuel. The item “MINIATURE HIT AND MISS ENGINE HAND MADE” is in sale since Thursday, June 16, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “arljoy” and is located in Jacksonville, Florida. This item can be shipped to United States.
  • Brand: HAND MADE
  • Model: HAND MADE
  • Country/Region of Manufacture: United States

Miniature Hit N Miss Engine Powering 2 Qt Ice Cream Freezer

MINIATURE HIT AND MISS ENGINE

MINIATURE HIT AND MISS ENGINE

MINIATURE HIT AND MISS ENGINE. Description: THIS IS A MINIATURE HIT AND MISS ENGINE THAT IS MOUNTED ON A BOARD AND INCLUDES THE CRANK HANDLE. DOES NOT APPEAR TO HAVE ANY MAKERS MARKS. SIZE IS ABOUT 12 INCHES LONG, 6 1/2 INCHES WIDE AND 6 INCHES TALL. THE FLYWHEELS ARE ABOUT 6 INCHES IN DIAMITER AND ABOUT 3/4 INCHES THICK. MOUNTED ON A WOOD BASE THAT IS ABOUT 12 x 16 1/2 INCHES. DO NOT KNOW WHETHER OR NOT IT RUNS SINCE I DID NOT TRY TO START IT. THE CRANK TURNS EASILY AND IT HAS COMPRESSION. NICE OVERALL USED CONDITION (SEE PICTURES) WITH SOME LIGHT SURFACE RUST, SOILING AND SCRATCHES. FEEL FREE TO LET ME KNOW SHOULD YOU HAVE ANY QUESTIONS OR NEED ADDITIONAL PICTURES. THANKS Terms of Sale: PLEASE MAKE SURE THAT THIS ITEM MEETS ALL OF YOUR NEEDS SINCE SALES ARE FINAL UNLESS I MAKE A MATERIAL ERROR IN THE DESCRIPTION. YOU SHOULD ALSO LOOK AT ALL OF THE PICTURES SINCE THEY ARE PART OF THE DESCRIPTION. FEEL FREE TO ASK QUESTIONS IF SOMETHING IS NOT CLEAR. The item “MINIATURE HIT AND MISS ENGINE” is in sale since Thursday, May 21, 2015. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “tiburon48″ and is located in Penfield, New York. This item can be shipped to United States.

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine

Miniature antique salesman sample? Hit and miss gas engine. Please see all 8 high resolution pictures for more details and condition. You will receive what you see in the pictures. For sale as is.The item “Miniature Antique Salesman Sample Hit and Miss Gas Motor Engine” is in sale since Saturday, April 18, 2015. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “vasjer” and is located in Syracuse, New York. This item can be shipped worldwide.

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag

For sale is a beautifully finished paul breisch running model of an associated “hired man” hit & miss engine. I had originally bought this for my father as a birthday gift but decided to give him something else instead. I have never tried to run it – it was always displayed. I believe the only thing you would need to run it would be a battery and a standard coil. As you can see from the pictures, it already has a very nicely built gas tank and filter connected to the stand. It also has a very neat crank handle to start the engine. It has good compression, and appears to have been run at least once. I do not know who made it, but it is a first class machining and finishing job. Again from the pictures, you can see many neat details the builder has added, such as various oiling points with brass turn caps. I do not think anything is missing from this engine – please look at all pictures to confirm this. There is a large “b” cast into the side of the block. The photos pretty well tell the condition of the engine. It is mounted on a nice piece of wood. Here are some of the dimensions. Engine – 5″ wide, 5″ tall, & 9 long. Flywheels – are approximately 4″ in diameter x 1/2″ wide. Wood base – is approximately 9″ x 3-3/4″ x 1 thick. Please let me know if you have any questions or need more pictures.The item “Miniature Hit and Miss Model Engine Gas Paul Breisch Associated Hired Man Vintag” is in sale since Sunday, April 05, 2015. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “tekne10″ and is located in Boston, Massachusetts. This item can be shipped to United States.