Butterfly and needle valves are all free. Mounting is 2 on centers. Harder to find carb. Most of my item are old and I will try to do my best to give an accurate description.
For your consideration is a Stover Hit Miss Engine Crank Guard part number 15K for a model KA. It is about 4-1/4 between the center of the holes for the mounting bolts. It’s about 10-3/4 from top to bottom flange. The guard part is about 3-3/8″ wide outside to 4-3/16″ as it tapers. It is heavy and made of cast iron. It’s painted yellow. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr.
For your consideration is an original Stover Hopper Funnel for a Hit Miss Stationary Engine. The part number is 43K2S. The edge dimensions of the raised portion that sets in the hopper is about 3-15/16″ x 6″. The outer is 4-7/8″ x 6-7/8″. It has both of the original cast cross bars, the bolts are broke off but have the lead sealing washers, the bars will need drilled and tapped for new bolts. It’s in original patina. This was removed from a CT2, it may fit other models but I’m not sure. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr.
This is an original cylinder head with valves for a Stover CT Series hit and miss gas engine. It is part number 6CT1 and is in excellent condition with no cracks, breaks, or repairs that I can see or know of. It has some filler added to the back face which looks to have been done at the factory and affects nothing. It mounts on a 3 1/8 square hole pattern and is from a 1 1/2 or 2hp engine. All of the threads are in great shape. The valves move as they should with minimal wear and may need a bit of cleaning as this head has been sitting for a while. These original parts are quite tough to find in the wild or even at swap meets! If you’ve been looking for one to complete a restoration here’s your chance. The pictures tell the story. I can be reached at 262 573 193 1 if you’d like to talk about it.
For your consideration is an original Stover CT2 fuel mixer. The part number cast into it is 125CT2S. The 2 mounting holes are 2 on center. The fuel needle turns. This one is unique on the choke being a shaft and a bigger elbow, the shaft is tight but moves and could use freeing up more. It’s in original patina. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can koozie is used for a size reference, it’s not included as part of the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr.
For your consideration is an original Stover Hopper Funnel for a Hit Miss Stationary Engine. The part number is 43K2S. The outer is 4-13/16″ x 6-13/16″. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale.
For your consideration is an original Stover CT3 cylinder head. The part number cast into it is, 6CT3. The 4 x 1/2″ bolt mounting pattern is about 3-3/4″ on centers. The 1 NPT exhaust threads should work fine as I threaded a pipe into it.
This is an original cast iron piston and rod for a Stover CT-3 and possibly a model K hit and miss gas engine. I believe it is NOS, new old stock, and seems to never have been used. The rod is part number 201-CT-3. The piston is part number 7CT3. The assembly is in excellent condition with no cracks, breaks, or repairs of any kind. The wrist pin has no noticeable wear. The connecting rod bearing looks to be in new condition. The piston is 4 1/4 inches in diameter. Please measure your engine to be sure it works for your application. These original Stover parts are exceedingly tough to find in the wild or even at swap meets! If you’ve been looking for one to complete a restoration or to replace your broken or repaired one here’s your chance. The pictures tell the story. I can be reached at 262 573 193 1 if you’d like to talk about it.