I don’t see any breaks or repairs. Mounting bolts are 2 7/8 on centers. Throttle bore 1 1/2. Most of my item are old and I will try to do my best to give an accurate description.
Home
› Category Archives › nelson
17Aug
NELSON BROS JUMBO SATTLEY Crankguard 1 1/2 and 1 3/4hp Hit Miss Engine NICE
nelson
Comments Off
This is a real nice original cast iron crankguard or fender for a 1 1/2 or 1 3/4hp Nelson Bros Jumbo or Sattley hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It has one extra small hole which doesn’t affect anything and would be easy to remedy. It has original paint and fine pinstriping on it as can be seen. It mounts with one hole on the bottom end. This is NOT for the earlier Model P engines. Please check your notes to be sure it works for your application. These cast iron crankguards are rather tough to find in the wild or even at swap meets and they’re so often missing so if you need one here’s your chance! The pictures tell the story. You won’t be disappointed in any way.
09Jul
NELSON BROTHERS Hit Miss Gas Engine FUEL MIXER CARBURETOR Steam Magneto Motor P4
nelson
Comments Off
This is an original fuel mixer or carburetor for a small Nelson Brothers hit and miss gas engine. It is part number P-4 and is in excellent condition with no cracks, breaks, or repairs except for a new choke plate which was nicely done and effective. It fits into a 1 3/16 hole in the bottom of the head and is from a 1 1/2 or 2hp engine. The fuel needle moves as it should and is in great shape. This was on a running engine when removed from service. These original parts are quite tough to find in the wild or even at swap meets! If you’ve been looking for one to complete a restoration here’s your chance. The pictures tell the story. It would surely beat making one! I can be reached at 262 573 193 1 if you’d like to talk about it.
04May
NELSON BROTHERS Hit Miss Gas Engine Piston Rod Cap 3K6 Steam Oiler 3 1/2 Motor
nelson
Comments Off
This is an original cast iron piston and rod with cap for a small Nelson Brothers hit and miss gas engine. The rod is part number 3K6 and the cap is K16. The assembly is in excellent condition with no cracks, breaks, or repairs of any kind except half of the rod bearing has been replaced with brass that worked well as this was in a running engine. The wrist pin has some mild wear The rings need to be replaced as they are all mismatched. The piston is 3 1/2 inches in diameter and the 3/4″ diameter wrist pin is 2 1/8″ on center from the top of the piston. Please measure your engine to be sure it works for your application. These original parts are exceedingly tough to find in the wild or even at swap meets! If you’ve been looking for one to complete a restoration or to replace your broken or repaired one here’s your chance. The pictures tell the story. I can be reached at 262 573 193 1 if you’d like to talk about it.
12Feb
Nelson Brothers Hit Miss Engine Cylinder Head P-20
nelson
Comments Off
Head removed from a smaller size Nelson bros hit & Miss Built engine. Typically tagged as a 1 1/2 or 1 3/4HP engine. Please research and do some measuring before purchasing this head to make sure it’s what you need! No breaks or welds that I can see. Good 1 NPT threads on the exhaust. The 4 mounting holes are spaced 3 7/16 apart from each other on centers. The valves have quite a bit of “slop” (wear) In the guides. I’ve seen many engines run that way and I imagine with a good cleaning and lap job to the valves they would work just fine. Keep in mind this item is over 100 years old. It’s old and used!!
26Sep
Nelson Brothers Hit And Miss Gas Engine Ignitor DA-19
nelson
Comments Off
A very nice Luce ignitor for an early Nelson brothers and possibly jumbo line antique, stationary, gas engine. Igniter is in good working condition and I think has been rebuilt but I have not tried it on in the engine. No cracks brakes or welds. Part number DA 19 ignitor has the roller attached and is in good condition. Please see pictures for more information and condition.
24Jul
NELSON BROS 7hp Hit Miss Gas Engine FUEL MIXER Steam Magneto Oiler Carburetor
nelson
Comments Off
This is an original fuel mixer or carburetor for a Nelson Brothers or Nelson Brothers-built hit and miss gas engine. It may fit other models or sizes so please do your homework to be sure it fits your application. It is in good condition with no cracks, breaks, or repairs of any kind. The fuel needle is stuck and should come loose with some heat or electrolysis. It mounts with two holes 2 7/8 inches apart on center and the hole in the flange is 1 1/2 in diameter. I believe this is for a 7hp or possibly a 5hp but please measure your engine to be sure it works for your application. With a little effort this mixer should be ready to be used on an engine or put in your inventory as a spare. These original parts are quite tough to find in the wild or even at swap meets! If you’ve been looking for one to complete a restoration or to replace your broken or repaired one here’s your chance. The pictures tell the story. It would surely beat making one! I can be reached at 262 573 193 1 if you’d like to talk about it. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in this country: US. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- Material: Cast Iron
- Type: Fuel Mixer Carburetor
- MPN: FB11
- Brand: Nelson Brothers
23Jul
3 HP Nelson Brother Maynard Carburetor Hit Miss Gas Engine
nelson
Comments Off
Only repair I see is throttle shaft is brazed. Mounting is 1 1/2 diameter. Needle valves and throttle work freely. Most of my item are old and I will try to do my best to give an accurate description. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “tonyaron29″ and is located in this country: US. This item can be shipped to North, South, or Latin America, all countries in Europe.
- Brand: Unbranded