Homestem › ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

Eachine ET7 Horizontal Hit and Miss Complete Gas Engine Model STEM Upgrade Engine Toys Specification: Brand: Eachine Name:Eachine ET7 Horizontal Hit and Miss Complete Gas Engine Model Material: Brass And Stainless Steel Displacement : 6CC Cylinder diameter : 22MM/0.87″ Itinerary : 20MM//0.87″ Size:approx. 180x125x125mm/7.09×4.93×4.93 Weight : 1610G (1cm=10mm=0.39inch) Measurement Details in the attached picture. Description This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine cylinder head is uniquely designed, and the valve mechanism is installed on the left side. The transmission controls the closing of the exhaust through the side gears. The flywheel on the left is equipped with a speed limiter. The engine will be more appreciated when working. You only need to add petrol to the tank and add the battery (4.5V) will be able to start it. Features: Engine startup steps 1. Open the bottom plate to check the wiring of the engine , connect thefuel tank pipe , and install the three No 5 batteries to close the bottomplate 2. Fill the fuel tank with gasoline (95). When the filling is completedmake sure there is no air in the oil pipe 3. Turn on the power switch and turn the flywheel to start the enginecounterclockwise on the right side of the engine (installing the flyinghammer position) Precautions: 1. If the ignition device is normal and the cylinder is under normalcompression , if the machine still does not start normally , it is very likelythat the carburetor needle should be adjusted 2. Screw the screw on the top of the carburetor , then loosen 1 / 4 turn , startthe flywheel , This can be done several times to make the mixing ratio of Package Included: 1x Eachine ET7 Model 1x Engine Spare Parts Start Device. Kids should be accompanied by adult. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight deviation for the measurement data. Please allow 1-3cm error. The item “ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys” is in sale since Tuesday, March 30, 2021. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “duoyun77″ and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Color: Gold+Silver
  • MPN: aJy5295172
  • Material: Brass+Stainless Steel
  • Size: 180x125x125mm/7.09×4.93×4.93″
  • Displacement: 6CC
  • Cylinder diameter: 22MM/0.87″
  • Itinerary: 20MM//0.87″
  • Manufacturer Part Number: aJy5295172

Comments are closed.