Here is a head for a 3hp Vertical Fairbanks Morse T. It is a little chipped out by one of the carb mounting holes. I think that would be an easy fix/ As far as I can tell there are no cracks, breaks, or welds to the water jacket area. The exhaust valve and seat looks and feel great with only minimal wear. The intake valve is missing. Check out the pictures and see if it something you need! For questions 419 789 1159. For a 3hp Vertical Fairbanks Morse T. The mounting pattern is about 4-1/4″ x 1-1/4″. The raised area in the center is about 4.7725 in diameter. The overall diameter of the head is about 7-9/16. Will need an intake valve. Will need one carb mounting hole repaired. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list.