Here is a connecting rod for a 6hp RX Stover Engine. Check out the pictures and see if it something you need! For questions 419 789 1159. Came off a 6hp RX Stover, may fit other models and sizes. It is about 21-3/8 in overall length not counting the studs. It is about 18-1/8 from center or wrist pin hole to center of crank hole. The wrist pin hole is 1-3/8 in diameter. The crank hole seems to be about 2-1/4″ in diameter, the bearing seems to be 2-1/2″ wide. The bearing is cracked but it should still work fine, it can’t go anywhere when its installed on the engine. It is 14 lbs before any box or packing material. “AS IS” what you see is what you get. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list.