Here is a head for a 6hp IHC M igniter style engine. There are no freeze breaks, cracks, or welds that I can see or know of. The exhaust valve guide is slightly chipped on the inside, that guide is long so I do not think it would hurt it in any way. The guides are also replaceable so it could be changed out if you wanted. Obviously it is missing its valves and springs. The stud on the throttle is a little loose but should work fine, some loctite would tighten it up. Check out the pictures and measurements and see if you need it. For questions 419 789 1159. For a 6hp IHC M Igniter Style Engine, nothing else. Missing valves & springs. Exhaust valve guide chipped inside, that will not hurt a thing. No freeze cracks, breaks, or welds. The mounting pattern is about 5-5/16″ x 5-5/16″. 34 lbs actual weight before box and packing material. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list.