Eachine ET2 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion Engine Collection DIY Project COD. Stirling Engine ET2 Upgrade Hit Miss Gas Engine Model Combustion Engine Collection. Engine parameters Size: 180-125 125MM Displacement: 6cc. Cylinder diameter: 22MM Iltinerary: 20. Weight: 1610G Engine startup steps:1. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate2. Fill the fuel tank with gasoline (95#). Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally; it is very likely that the carburetor needle should be adjusted 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start. The flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Q: Frequently Asked Question. A: Answer to the question above. Describe your brand story, including establishment and development timelines, milestones, etc. The item “Eachine ET2 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion” is in sale since Tuesday, May 21, 2019. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “buy_and_buy24″ and is located in Shanghai. This item can be shipped worldwide.
- Country/Region of Manufacture: China
- Brand: Stirling Engine
- Certification: Europe certified (CE)
- Warning: NO
- Age Range: 8~13 Years,14 Years & up,5-7 Years
- Theme: Transportation