NEW ETX Hit & Miss Gas Vertical Engine Stirling Engine Model Upgraded Version Water Cooling Cycle Engine Collection. What is the Stirling engine? A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. The engine is like a steam engine in that all of the engine’s heat flows in and out through the engine wall. How the Stirling engine works? This is traditionally known as an external combustion engine in contrast to an internal combustion engine where the heat input is by combustion of a fuel within the body of the working fluid. Unlike the steam engine’s use of water in both its liquid and gaseous phases as the fluid, the Stirling engine encloses a fixed quantity of permanently gaseous fluid such as air or helium. As in all heat engines, the general cycle consists of compressing cool gas, heating the gas, expanding the hot gas, and finally cooling the gas before repeating the cycle. Item Name: ETX Hit & Miss Vertical STEM Engine Upgraded Model. Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. Ignition Power Supply: 3.7V, 3 pcs AA Batteries(Not Included). This is a vertical engine, we have upgraded, added a mechanical water pump, cooling water tank, it can carry out the water cooling cycle. There are exhaust pipes. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Check if the water tank lacks water. If there is air in the cooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. When the machine stops, the power switch should be turned. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by an adult. 1 x Eachine ETX Hit & Miss Vertical STEM Engine Upgraded Model. 1 x Engine Spare Parts Hand Start Device. The item “ETX Hit & Miss Gas Vertical Engine Stirling Engine Model Upgraded Water Cooling” is in sale since Saturday, August 22, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “megee-0″ and is located in Shenzhen. This item can be shipped to United States, all countries in Europe, Canada, Australia.
- MPN: Does Not Apply
- Country/Region of Manufacture: China
- Brand: Unbranded
- Powered By: Gas
- Type: Hit & Miss