Here is a cylinder for a 2hp Vertical Fairbanks Morse T. There are no cracks, breaks, or welds on the main casting that I can see or know of. It will probably need a little work before use but it is very rare to find one of these that has never been broken by frost damage. Check out the pictures and see if it something you need! For questions 419 789 1159. For a 2hp Vertical Fairbanks Morse T. No cracks, breaks, or welds that I can see or know of on the main casting. 2 of the head studs appear to be broken off. It may need bored out and or sleeved (see pics). The head mounting holes or studs are about 3-11/16″ x 3-11/16″ on center. The mounting pattern to the engine block is about 4-1/4″ x 4-1/4″ on center. It is about 12-5/8 tall from the block mounting flange to the head gasket surface. Has a hot tube mounting area, the mounting holes look to have been filled with bolts that have been cut off flush. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list.