Here is a very nice and HEAVY KW Ignition Co. Model F ignition or lighting magneto. It stands 10″ tall, 8 1/2″ at widest and 6 across. It is in very good overall condition with the only real flaw I found is a small rip in the brass cover. It is quite small and will not affect the operation. I have provided a good picture of it. In the research I have done on this mag I have found that they were built between 1904 and 1913. In 1 catalog it stated that this mag was used as a replacement for the battery to power the buzz coils on the Ford model T’s. Please look at all the pictures and decide for yourself what you feel the condition is and weather you really want or need this mag.
Here is an original ignition timer or contact for a 3hp Olds Type A hit and miss gas engine. It also may fit other sizes of engines but it came off a 3hp. Seems to be in great shape. Check out the pictures and see if you need it. Fits a 3hp Olds Type A may fit other sizes? The mounting bolt is 5/16. For questions 419 789 1159. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in this country: US. This item can be shipped worldwide.
DX ignition is a modern electronic buzz coil for your Fairmont speeder and works like a Pontiac or Ford buzz coil with the same simple connections to the timer and battery to produce a steady stream of sparks. DX ignition operates on 6-12 volts negative or positive ground. It is made with finger jointed oak and uses electronic technology with a high output LS2 ignition coil for a wider spark plug gap of. Because DX ignition is electronically controlled there are no moving parts to ever adjust or wear out. Proper ignition allows engines to start and run so much better! These coils also look nice and work great on stationary hit & miss engines. DX ignition comes with a spark plug wire. The Ford buzz coil pictured is not included, for reference only. The item “DX ignition electronic Buzz Coil for Fairmont speeder and hit & miss engines” is in sale since Tuesday, July 24, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “deere41″ and is located in Ethan, South Dakota. This item can be shipped to United States.
Ignition Buzz Box Coil for Hit & Miss Engine, Complete with Rechargeable Battery. Here is a complete ready to use Buzz Box for your Hit n Miss Engine. Designed and sized for model engines it certainly can be used on full size engines too. This Buzz Box provides a powerful spark. It is a complete ignition system ready to go immediately upon receipt; just connect three wires to the knurled nut connection studs. One wire to the engine spark plug, one wire to the engine timing (points) and one wire to ground on the engine frame. I even charged the battery so it will work out of the box. In the Buzz Box is a new set of Ford Model-T points with new electrics for everything else; coil, condenser, on-off toggle switch, rechargeable 6 volt battery, and charging jack. A wall plug-in (wall wart) charger is also included, 100 to 240VAC, 50/60Hz. It will slow-charge overnight, and will not overheat the battery. My experience suggests longer life of the Ford Model-T points using a 6V rather than 12V battery. The wood box is constructed of American Red Oak, 5/16 thick, sealed with a clear coat of lacquer for protection, measuring 3-1/2 x 5-7/8 x 4-1/4 High. Small and compact it weighs 2.17 pounds. Note the very strong rabbeted butt joint corners. Spark adjustment is convenient with wrench or finger turning of the Ford points brass hex nut as shown in the photo. For mounting to your display base, 1/4-20 threaded brass inserts are provided on the bottom. Centered and 3 apart, mounting is quick and easy. Production costs have forced me to recently raise the price Im sorry to say. It is the the best ignition box on the market today. The item “Ignition Buzz Box Coil for Hit & Miss Model Engine” is in sale since Friday, April 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Lathe”. The seller is “neilaz” and is located in Phoenix, Arizona. This item can be shipped worldwide.
Ignition Buzz Box Coil for Hit & Miss Engine, New with Rechargeable Battery. Here is a complete ready to use Buzz Box for your Hit’n Miss Engine. Designed and sized for model engines it certainly can be used on full size engines too. This Buzz Box provides a powerful spark. It is a complete ignition system ready to go immediately upon receipt. Just connect three wires to the knurled nut connection studs. One wire to the engine spark plug, one wire to the engine timing (points) and one wire to ground on the engine frame. I even charged the battery so it will work right out of the box. In the Buzz Box is a refurbished set of Ford Model-T points, coil, condenser, on-off toggle switch, rechargeable 6 volt gel cell battery, and charging jack. It will slow-charge overnight, and will not overheat the battery. My experience suggests longer life of the Ford Model-T points using a 6V rather than 12V battery. The wood box is constructed of American Red Oak, 5/16″ thick, sealed with a clear coat of lacquer for protection, measuring 3-1/2″ x 5-7/8″ x 4-1/8″ H. Small and compact it weighs 2.1 pounds. For mounting to your display base, 1/4-20 threaded brass inserts are provided on the bottom. Centered and 3” apart, mounting is quick and easy. FORD SCRIPT BRASS POINTS. For those of you who are interested I now have available a few of the Ford script brass points shown below. The free listing tool. The item “Ignition Buzz Box Coil for Hit & Miss Engine, New with Rechargeable Battery” is in sale since Sunday, March 01, 2015. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “neilaz” and is located in Phoenix, Arizona. This item can be shipped worldwide.
