Home
› Category Archives › model
21Mar
Model Hit Miss / Stationary Gas Engine
model
Comments Off
It started right up after all the work. I have run the engine about three times now about 10 min’s each time , it does go into hit miss cycle but could use a little tweaking to the fly ball type gov. Included with the engine is all the old parts. If you have any questions contact me. The item “MODEL HIT MISS / STATIONARY GAS ENGINE” is in sale since Sunday, March 19, 2017. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “oldsteam52″ and is located in Cadott, Wisconsin. This item can be shipped to United States.
- Type: Gas
03Jan
Model hand pump with pump jack, for model Hit and Miss engine fully operational
model
Comments Off
Offered for sale is a fully operational model water pump with pump jack. This was constructed from a decorative pump I found at a swap meet. I turned the decorative piece into an operational pump and built the pump jack from a speed reducer. Water is stored in a plastic reservoir hidden beneath the pump bed. It can run for hours recycling the same water. The last two photos show it belted to a Breisch Olds model engine. The item “Model hand pump with pump jack, for model Hit and Miss engine fully operational” is in sale since Monday, January 02, 2017. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “bferenc” and is located in Summit Station, Pennsylvania. This item can be shipped to United States.
- Type: water pump with jack
- Powered By: flat belt
- Country/Region of Manufacture: United States
10Dec
Model Hit And Miss Engine Vertical Gas Engine Machined From Castings
model
Comments Off
Model Vertical Hit And Miss Gass Engine. Measures aprox 7.5 inches tall. All aluminum, stainless steel and brass parts. I assume this is a good runner with a little mechanical knowledge. The item “Model Hit And Miss Engine Vertical Gas Engine Machined From Castings” is in sale since Sunday, December 04, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “littleshopofhoardres” and is located in Spokane, Missouri. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.
11Nov
Model Hit And Miss Gas Engine Fully Machined & Assembled Quality Aluminum Steel
model
Comments Off
Hit and miss engine from a kit and cadtongs, all top notch materials, Aluminum, Steel, stainless, and Brass, it is free with good compression, of course it would need fuel and ignition, but I see no reason this would not be a great runner, although with any small engine I suggest some mechanical knowledge to be able to get running and to be able to tinker with. The item “Model Hit And Miss Gas Engine Fully Machined & Assembled Quality Aluminum Steel” is in sale since Wednesday, November 09, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “littleshopofhoardres” and is located in Spokane, Missouri. This item can be shipped to United States.
04Nov
Model Hit and Miss Engine castings Aermotor 8 Cycle and pumpjack
model
Comments Off
Complete castings set for 8 cycle aermotor air-cooled engine with pump jack. Neatest engine you will ever see. This castings set is no longer produced. Health issues won’t allow me to machine it. Fully machined and running this engine is worth thousands. All castings are iron and bronze. No foreign and no CANADA. The item “Model Hit and Miss Engine castings Aermotor 8 Cycle and pumpjack” is in sale since Wednesday, November 02, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “machineman8625″ and is located in Vacaville, California. This item can be shipped to United States.
- Brand: Aermotor
- Type: Hit & Miss
- Model: 8cycle with pump Jack
19Jul
Model Twin Internal Combustion Engine, 2 Cylinder, 4 stroke, Hit n Miss
model
Comments Off
His is a running model gasoline engine. It is a two cylinder, four stroke and drives a DC generator which powers a 60 watt incandescent light bulb. The bore and stroke are. 875″ x about 1.125″. The crankshaft throws are 180 degrees apart so it fires and sounds like an old, two cylinder John Deere. The engine has CDI ignition with two 1/4-32 miniature spark plugs. The engine starts and runs well, although it is a model and may require some fiddling from time to time to keep it running well. The flywheel has a brass rim and is 6 diameter. Overall dimensions including the base are 16″ long x 6″ wide x 7.5 high. The base is made from Walnut and baltic birch plywood. This engine is not hit n miss, it has a carburetor with a throttle. The item “Model Twin Internal Combustion Engine, 2 Cylinder, 4 stroke, Hit n Miss” is in sale since Sunday, July 17, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “customscopes” and is located in Round Rock, Texas. This item can be shipped to United States.
07Jul
Model hit and miss engine
model
Comments Off
Cool model of an old hit and miss engine dont know much about it bought at an estate sale, i was told it has been ran. It turns over and has compression and seems to be built good so it should run with someone that knows what they are doing. The item “Model hit and miss engine” is in sale since Wednesday, July 06, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “kramerica741″ and is located in Loveland, Colorado. This item can be shipped to United States.
10May
Model Tractor Hit And Miss John Deere Steam Engine
model
Comments Off
Believe this is not a kit. It was completely built. Please look at pictures this is an amazing tractor. This tractor runs off alcohol. Fill brass canister(which has a wick in it) and light wick on other end. Shift into gear and watch move.. Very unique and all machined. I received this in trade and do not know anything about it. Only thing I know is that it was built by same gentleman that built a hit an miss motor that was just listed. And look at pictures. The item “Model Tractor Hit And Miss John Deere Steam Engine” is in sale since Monday, May 09, 2016. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “panheadpete1954″ and is located in Michigan City, Indiana. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.