Home › Tag Archives › complete

Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2

Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2

Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2

Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2

Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2

Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2

Address, your order will be canceled and you will be blocked! The item “Antique Maytag Hit Miss Engine Kick Start Cast Iron Complete #2″ is in sale since Thursday, June 10, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “sierra-pass” and is located in Burson, California. This item can be shipped to United States.
  • Type: Hit & Miss
  • MPN: Does not apply
  • Brand: Maytag
  • Powered By: Gas

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

It has been disassembled and gone through, cleaned, bead blasted , primed and painted. The cylinder has been honed and new rings have been installed. Any parts that needed to be replaced were. All the threads have been chased and new brass hardware used throughout. It runs like it should, You get it the way the picture shows it. Fuel has been drained. The item “1929 Maytag Washing Machine Engine Restored Complete” is in sale since Friday, July 9, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “oldvlrider” and is located in Waldwick, New Jersey. This item can’t be shipped, the buyer must pick up the item.
  • MPN: Does Not Apply
  • Brand: Maytag
  • Powered By: gas and oil mix/ 16-1
  • Type: Hit & Miss

1928 Maytag Washing Machine Engine Restored and Complete Model 92

1928 Maytag Washing Machine Engine Restored and Complete Model 92

1928 Maytag Washing Machine Engine Restored and Complete Model 92

1928 Maytag Washing Machine Engine Restored and Complete Model 92

1928 Maytag Washing Machine Engine Restored and Complete Model 92

1928 Maytag Washing Machine Engine Restored and Complete Model 92

For sale I have a 1928 Maytag engine# 266396. This engine was taken apart, wire brushed, bead blasted and painted while in pieces. Cylinder was honed with new rings and gaskets. Carbruetor was cleaned with new air valve and seat with spring. This engine starts and runs great at a slow steady pace. Engine has new decals and is ready to show. The item “1928 Maytag Washing Machine Engine Restored and Complete Model 92″ is in sale since Thursday, June 17, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “donswood24″ and is located in Lincoln, Illinois. This item can be shipped to United States.
  • Model: 92
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Maytag
  • Powered By: Gas & oil

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition

Great compression, hot magneto. The item “R. M. Wade Drag Saw Gas Engine -Hit Miss Complete SSM1 Excellent Condition” is in sale since Wednesday, June 9, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “sierra-pass” and is located in Burson, California. This item can’t be shipped, the buyer must pick up the item.
  • MPN: SSM1
  • Brand: Wade
  • Powered By: Gas
  • Equipment Type: Drag Saw
  • Type: Hit & Miss

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys Specifications: Brand: Eachine Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model Size: 180x125x125MM/7.02×4.88×4.88inch Displacement: 6CC. Cylinder diameter: 22MM/0.86inch Itinerary: 20MM/0.78inch Weight: 1610G/3.54ib Material: Brass And Stainless Steel (1cm=10mm=0.39inch) Measurement Details in the attached picture. Package included: 1x Eachine ET6 Model 1x Engine Spare Parts Start Device Features: 100% brand new and high quality. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Engine startup steps: 1. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position) Precautions: 1. If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Notice -Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade” is in sale since Monday, December 7, 2020. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “homesale_estore” and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • MPN: Does not apply
  • Manufacturer Part Number: CTT2857749

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine Model M90

Horizontal Hit and Miss Complete Engine. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. You only need to add petrol to the tank and add the. Battery (3.7V) will be able to start it. I believe you will like it. Specifications Size: 170MM 120MM, 90MM. The item “Horizontal Hit and Miss Complete Engine Model M90″ is in sale since Saturday, February 27, 2021. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “dtjsteam” and is located in Foshan, Guangdong. This item can be shipped worldwide.
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Character Family: Engine for Model Ship / Marine
  • Brand: MC

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy

Tools, Industrial & Scientific. Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counter clockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburettor needle should be adjusted. Screw the screw on the top of the carburettor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual colour of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. 1x Eachine ET6 Model. Grab yours today before they run out! We are glad to announce, that we have opened another warehouse in Czech Republic. This will allow us to serve our Europe Union costumers much faster. How awesome is that? ! All deliveries are recorded. That means, in some EU countries you will be notified by SMS, when your parcel arrives! Costumer satisfaction is our TOP priority. We always here to HELP AND WORK with all off our costumers, to resolve their issues and concerns. It is important that you check your order or items upon receipt. If any errors occur or issues arise then these need to be reported to us immediately so that we can investigate. Please provide details of the fault and if possible attach pictures to your message. Huge range of products in stock. Get in Touch with Us. The item “Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gasoline Engine Toy” is in sale since Tuesday, April 6, 2021. This item is in the category “Toys & Games\Educational Toys\Science & Nature”. The seller is “ismd.ltd” and is located in Greenford. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
  • Subtype: Science/ Nature
  • Brand: EACHINE
  • Type: Educational Toys

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade

New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys. Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the. Fuel tank pipe, and install the three No. 5 batteries to close the bottom. Fill the fuel tank with gasoline (95#). When the filling is completed. Make sure there is no air in the oil pipe. On the right side of the engine installation of the flying hammer. Turn, its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine. Counterclockwise on the right side of the engine installing the flying. If the ignition device is normal and the cylinder is under normal. Compression, if the machine still does not start normally, it is very likely. That the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start. The flywheel, This can be done several times to make the mixing ratio of. Gasoline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. 1x Eachine ET6 Model. The item “New Model Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade” is in sale since Saturday, August 8, 2020. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “sunrise.shop” and is located in China Or Hong Kong . This item can be shipped worldwide.
  • Model: ET6
  • Country/Region of Manufacture: China
  • Year: 2020
  • Itinerary: 20MM
  • MPN: Eachine ET6
  • Size: 180*125*125MM
  • Weight: 1610G
  • Material: Brass And Stainless Steel
  • Displacement: 6CC
  • Cylinder diameter: 22MM
  • Age Level: 8-11 Years
  • Brand: Eachine

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

1929 Maytag Washing Machine Engine Restored Complete

It has been dissasbled and gone through, cleaned, bead blasted , primed and painted. The cylinder has been honed and new rings have been installed. Any parts that needed to be replaced were. All the threads have been chased, bolts have been cleaned. It runs like it should, You get it the way the picture show it. Fuel has been drained. I also have another newly restored 1929 that I can set on a cart the same way that this one is, in case you want 2. The item “1929 Maytag Washing Machine Engine Restored Complete” is in sale since Wednesday, March 31, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “oldvlrider” and is located in Waldwick, New Jersey. This item can’t be shipped, the buyer must pick up the item.
  • MPN: Does Not Apply
  • Brand: Maytag
  • Powered By: gas and oil mix/ 16-1
  • Type: Hit & Miss

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold

Eachine EM1 Micro Engine Model Brass Double Piston Complete STEAM Engine Toys Collection Gifts. Brand: Eachine Name: EM1 Engine Model Size:104x99x70MM/4.06×3.87×2.73inch Displacement: 1.9cc. Cylinder diameter: 13MM/0.51inch Itinerary: 16MM/0.63inch Veight: 1200G This is a micro engine. It is made of brass and stainless steel Air-cooledcooling structure. Measurement Details in the attached picture. 1x Eachine EM1 Model. 100% brand new and high quality. Check the wiring of the engine from the bottom plate and install three AA batteries(4.5V) 2. Use gasoline(95#)to fill the fuel tank. When the filling is completed, press the carburetor port by hand on the right side of the engine(power switch surface), and turn the flywheel clockwise for many times. Its function can make the mixing Fuel fully enters the cylinder. Turn on the power switch and quickly turn the flywheel clockwise to start the engine on the right side of the engine(power switch surface). When the ignition device is normal and the cylinder compression is normal, if the machine cannot start normally, it is very likely that the carburetor oil needle needs to be adjusted. After tightening the main oil needle on the carburetor, loosen 1/4 turn and start the flywheel, so that the mixing ratio of gasoline and air can reach the normal working mixing ratio after seven times. When the machine stops, the power switch should be turned off. Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “Eachine ET1 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Mold” is in sale since Tuesday, January 12, 2021. This item is in the category “Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Engine, Exhaust & Fuel Systems\Petrol/Nitro Engines”. The seller is “drewer224″ and is located in Shenzhen. This item can be shipped worldwide.
  • MPN: ljP3576564
  • Brand: Unbranded/Generic
  • Name:: EM1 Engine Model
  • Size:: 104x99x70MM/4.06×3.87×2.73inch
  • Displacement:: 1.9cc.
  • Cylinder diameter:: 13MM/0.51inch
  • Itinerary:: 16MM/0.63inch
  • Veight:: 1200G
  • Manufacturer Part Number: ljP3576564