Brand new gas tank for the 3 hp Fairbanks Z engines that do not have a fuel pump. 17.5 x 10 x 4 1/8.
Home
› Tag Archives › fairbanks
09Jul
IGNITER for a HEADLESS FAIRBANKS MORSE Z FM Hit and Miss Old Gas Engine
igniter
Comments Off
Here is an igniter for a 1-1/2hp Headless Fairbanks Morse Z engine. Seems to be in great shape and ready to use. Take a look at the pictures and decide if you need it. For questions 419 789 1159. The mounting holes are 2-5/8 apart on center. SPECIAL NOTE: This is for an FM Z engine. There are many different types of “Z” engines. If you aren’t 100% sure this will fit your engine do yourself a favor and don’t assume things : 419 789 1159 for questions. Most items will go out faster though. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. So if someone doesn’t pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven’t caught on this is supposed to be mildly funny but yet serious at the same time. If you decide you don’t want it or find another one cheaper you I won’t take it back. For example if my measurements are wrong I would take it back. So here it is. 14316 St Rt 281. Check out my other items. Be sure to add me to your favorites list.
08Jul
CARBURETOR 3hp 6hp Fairbanks Morse Z Throttle Gov Engine Hit Miss Fuel Mixer
carburetor
Comments Off
Carburetor for 3hp – 6hp Fairbanks Morse Throttle Governed Engine. Fits 3HP – 6HP Fairbanks Morse Z throttle governed engine. 3 1/4 apart on center carb mounting. The needle valve that goes to the starter side of carb is good. The needle valve that goes to gas tank is good. Cast iron original part no. There is a hole on the side for natural gas line. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items / gasenginetom.
25Jun
FAIRBANKS MORSE Z H T N Choke Assembly Air Intake Hit Miss Engine Steam Tractor
fairbanks
Comments Off
This is an extremely hard to find original choke assembly or air damper for a Fairbanks Morse throttle governed or hit and miss gas engine. It is part number ZAC2108 and is in used condition with no cracks, breaks, or repairs of any kind that I can see or know of. The mounting holes are 2 1/4 inches apart on center. The intake hole is about 1 9/16 inch inside diameter and 2 inch outside diameter. The hole in the flange is about 1 3/8 inches. The choke lever moves as it should and the quadrant and choke plate are in nice shape. I believe this is for a 1 1/2 or 2hp Z engine but could easily be used on a Fairbanks H or T engine as well. Please measure your engine or consult your parts book to be sure. This choke assembly is quite tough to find so if you’ve been looking for one to complete a restoration or to put on the shelf with the rest of your engine parts here it is. The pictures tell the story. It would surely beat making one! I can be reached at 262 573 193 1 if you’d like to talk about it.
25Jun
CARBURETOR 3HP Fairbanks Morse Z Throttle Gov Engine Hit Miss Fuel Mixer
carburetor
Comments Off
Carburetor for 3hp – 6hp Fairbanks Morse Throttle Governed Engine. The gas line is fitted for the 3HP only. The carb itself will work for the 3HP or 6HP. Fairbanks Morse Z throttle governed engine. 3 1/4 apart on center carb mounting. The needle valve that goes to the starter side of carb is good. The needle valve that goes to gas tank is good. Cast iron original part no. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items / gasenginetom.
23Jun
FAIRBANKS MORSE Z 7 CLUTCH PULLEY Hit Miss Gas Engine Steam Tractor Magneto
fairbanks
Comments Off
Here is a scarce V-belt style clutch pulley for a Fairbanks Morse engine. It was made by WA Jones in Chicago and has the original brass tag on it. The belt pulleys are 7″ in diameter and the clutch mounts to every other spoke of the flywheel with holes about 3 7/8″ on center. The carrier has a 1 3/8 hole for the crankshaft. This clutch should fit on a 1 1/2 and 2hp Fairbanks Morse Z, a Headless Z, and a ZC enclosed crank engine. It may fit on others as well so please measure your engine to be sure it will work for you. It will fit on any engine with an adapter plate. It is in good condition but does have an ear that needs repair as can be seen. It is stuck but I’m sure with a little heat an patience it would free up as it looks just dry stuck. It should make a nice clutch for your engine. I can deliver for free (or a cold beverage) to Coolspring, PA, Baraboo, WI, or Portland, IN, later this year. These Fairbanks Morse clutch pulleys are extremely difficult to find in the wild or even at swap meets and they really set an engine off! They also make it possible to run belt driven implements with your engine. If you’ve been looking for one to complete a restoration here’s your chance. The pictures tell the story. I can be reached at 262 573 193 1 if you’d like to talk about it.
17Jun
CARBURETOR 1 1/2 HP 2 HP Fairbanks Morse Z Dishpan Hit Miss Gas Engine ZAN4A
carburetor
Comments Off
Carburetor for 1 1/2 HP – 2 HP Fairbanks Morse Z Dishpan Hit Miss Engine. 2 1/4 apart on center carb mounting. Cast iron original part no. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items / gasenginetom.
13Jun
3 6 HP Fairbanks Morse Z Governor Bracket Cam Gear Throttle Engine Hit Miss
fairbanks
Comments Off
Governor Bracket Cam Gear for. 3HP – 6HP Fairbanks Morse Z. Throttle Governed Gas Engine. Bracket and gear are in good repaired condition and ready to use. For use on a 3-6 HP Fairbanks Morse “Z” throttle governed engine. Cast Iron Bracket Part No. Takes AB33 or AB34 magneto and mounts 2 3/16 center to center. 4 7/16 center to center 2 bolt engine mounting – area around the mounting holes has been repaired. Cast iron gear has 70 straight teeth that are 3/4 wide. Gear has 7 1/8 diameter. BRACKET HAS A SOLID REPAIR – SEE PHOTOS. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine related items / gasenginetom.