Home › Tag Archives › model
21Aug

Working Hit and Miss Model Engine Gas Powered 1/3 Scale Galloway Casting Kit

admin working Comments Off
Working Hit and Miss Model Engine Gas Powered 1/3 Scale Galloway Casting Kit

Working Hit and Miss Model Engine Gas Powered 1/3 Scale Galloway Casting Kit

Working Hit and Miss Model Engine Gas Powered 1/3 Scale Galloway Casting Kit

Working Hit and Miss Model Engine Gas Powered 1/3 Scale Galloway Casting Kit

THE BEST MODEL CASTINGS IN THE WORLD! Brand New in the Box – Galloway Hit and Miss Casting Kit. Galloway 1/3 Scale Casting Kit of the Galoway 5 HP Hit and Miss Engine. Cast Iron Castings (7) 2 flywheels, base, bearing caps, cylinder, head, and water hopper. Bronze Castings (9) Connecting rod block, igniter, igniter trip, push rod brackets, governor bracket, carburetor, rocker arm bracket, muffler top and bottom. Aluminum Castings (1) Piston. Decals (2) Photo Engraved Nameplate, Detailed Blueprints (7) 17 x 22, Set of Gears (Exact width, bore, and one with shallow keyway). Includes Optional Cast Iron: Sub-base. Galloway Model Specifications: Flywheels – 10.200 inch Bore Diameter – 1.750 inch Stroke – 3.375 inch. THIS KIT IS A CASTING KIT THAT REQUIRES EXTENSIVE MACHING WITH A LATHE AND MILL. The item “Working Hit and Miss Model Engine Gas Powered 1/3 Scale Galloway Casting Kit” is in sale since Thursday, August 20, 2020. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “mini-steam” and is located in Sunbury, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • MPN: Does Not Apply
  • Brand: Coles
17Aug

M92 Horizontal Hit and Miss Complete Engine Model

admin horizontal Comments Off
M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine Model

M92 Horizontal Hit and Miss Complete Engine. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. You only need to add petrol to the tank and add the. Battery (3.7V) will be able to start it. I believe you will like it. Specifications Size: 170MM 120MM, 90MM. The item “M92 Horizontal Hit and Miss Complete Engine Model” is in sale since Thursday, August 6, 2020. This item is in the category “Toys & Games\Steam”. The seller is “galglg” and is located in Foshan, Guangdong. This item can be shipped worldwide.
  • Sub-Type: Engines
  • MPN: Does Not Apply
  • Scale (Gauge): Steam
  • Assembly: engine
  • Brand: Microcosm
  • Product Type: Steam/ Live Steam
17Aug

Maytag hit and miss engine model 72-d preowned

admin maytag Comments Off
Maytag hit and miss engine model 72-d preowned

Maytag hit and miss engine model 72-d preowned

Maytag hit and miss engine model 72-d preowned

Maytag hit and miss engine model 72-d preowned

Maytag hit and miss engine model 72-d preowned

Maytag hit and miss engine model 72-d preowned

Maytag hit and miss engine model 72-d preowned

This is a very nice antique hit and miss engine. The item “Maytag hit and miss engine model 72-d preowned” is in sale since Sunday, August 9, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “randyaw5647″ and is located in Hillsboro, Ohio. This item can be shipped to United States, Canada, Bahamas, Uruguay.
  • Engine Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Maytag
16Aug

John Deere Model E Hit And Miss Engine For Sale Tennessee Kentucky Threshermens Association

admin john Comments Off
14Aug

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

admin john Comments Off
John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice

John Deere 3 hp – Restored – Runs very well. Can send you a video on request. The item “John Deere Hit And Miss Model E 3 HP Stationary Gas Engine Magneto Restored Nice” is in sale since Tuesday, August 11, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “stout_llc” and is located in Portland, Oregon. This item can’t be shipped, the buyer must pick up the item.
  • Engine Type: Hit & Miss
11Aug

Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc

admin model Comments Off
Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

Model OLDs Gearless hit & miss Gas Engine Mechanic's Kit by Debolt Machine Inc

This is a model that is based on a 2-1/2 horsepower Vertical gear less, engine built in the 1890′s. It incorporates a pendulum type governor, igniter ignition, and a fuel pump all without the use of gears. This is accomplished with a notched cam with a ratchet wheel, advanced simply by eccentric movement. All of these functions are miniaturized for you, in detail in a fully operational model engine. Runs on common Gasoline. Model engine specifications, are 1-3/4″ bore, 2-1/4′ stroke, 12-1/16″ diameter flywheels. Engine height finished 22-1/2, weight 80 pounds as shown in the photo of the finished engine. This is a 4/10 scale of a full size engine. The hobbyist or person with mechanical skills can assemble this model. It requires painting, polishing, assembly, and a wood base. No machining is necessary. Kit includes, assembly and operational DVD, complete set of machined parts, all nuts, bolts, studs, cotter keys, and piping, name plate, complete fuel system, all ignition, and igniter parts, lubricators, with oilier and a grease cup. (UPS) Running examples can be seen on utube. The listing Photo shows a assembled finished Model engine. The item “Model OLDs Gearless hit & miss Gas Engine Mechanic’s Kit by Debolt Machine Inc” is in sale since Monday, August 10, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “weplan” and is located in Zanesville, Ohio. This item can be shipped to United States.
  • Model: Hit and Miss Gas Engine
  • Country/Region of Manufacture: United States
  • Type: Hit & Miss
  • MPN: Does Not Apply
  • Brand: Debolt Machine Inc.
  • Powered By: Gas
09Aug

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

admin eachine Comments Off
Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection. Eachine ET1 Item Name: Full Metal Hit Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 180x125x75mm/7.02×4.88×2.93inch Size Of Wooden Base: 180x66x50mm/7.02×2.58×1.95inch Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Age: Kids over 10 years old. (1cm=10mm=0.39inch) Measurement Details in the attached picture. 1 X Eachine Hit & Miss Gas Engine (With Base) Features: 100% brand new and high quality. Teaching will be more intuitive and more interesting. Student can understand it quicker and better. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion Upgrade” is in sale since Saturday, July 4, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “luckyfine2017″ and is located in Shenzhen. This item can be shipped worldwide.
  • Model: Eachine ET1
  • Type: Gas Engine Hit & Miss
  • Powered By: Gas
  • MPN: Does not apply
  • Brand: Unbranded/Generic
  • Manufacturer Part Number: WhG3471339
  • Use: Vehicles & Remote Control Toys
08Aug

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

admin maytag Comments Off
Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss

Bought this Old Kick Start – “Maytag” 2 Cylinder Model 72-D engine at an estate sale. Owner said he has had it running many time. Said he use to just sit and listen to it run. I, myself have never heard it crank/run. You can see where the owner did a touch up paint job on logos. Motor is missing the kick start foot pedal. Probably was there somewhere but could not locate it. Engine serial # 101554. Has wear, scuffs and scratches/scratched to finish with settled dirt and some grime from shop storage. I have not cleaned. Only wiped off some dust. Kick part works and engines turns fine. Paper towel stuck in exhaust to prevent dust entrance. May need a little TLC to get cranked but see no reason man would not tell truth. Sells in AS IS condition! Photo of each side for condition viewing. Sells EXACTLY as pictured. Package will weigh nearly 50 lbs. PLEASE wait until you get an invoice from me before paying. INTERNATIONAL BUYERS ARE WELCOME. The item “Old Maytag Washer Kick Start 2 Cylinder Gas Engine Model 72-D Hit Miss” is in sale since Friday, August 7, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “stuffman1″ and is located in South Fulton, Tennessee. This item can be shipped to United States.
  • Type: Kick Start
  • MPN: Does Not Apply
  • Brand: Maytag
  • Powered By: Gas
08Aug

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

admin eachine Comments Off
Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection. Eachine ET1 Item Name: Full Metal Hit Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 180x125x75mm/7.02×4.88×2.93inch Size Of Wooden Base: 180x66x50mm/7.02×2.58×1.95inch Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Age: Kids over 10 years old. (1cm=10mm=0.39inch) Measurement Details in the attached picture. 1 X Eachine Hit & Miss Gas Engine (With Base) Features: 100% brand new and high quality. Teaching will be more intuitive and more interesting. Student can understand it quicker and better. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “Eachine ET1 STEM Hit & Miss Gas Engine Stirling Engine Model Combustion QZ” is in sale since Tuesday, July 28, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “chenyuancherry” and is located in Shenzhen. This item can be shipped worldwide.
  • Model: Eachine ET1
  • Type: Gas Engine Hit & Miss
  • Powered By: Gas
  • MPN: wvD7756671
  • Brand: Unbranded/Generic
  • Manufacturer Part Number: WhG3471339
  • Use: Vehicles & Remote Control Toys
07Aug

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

admin stem Comments Off
ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New

ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project. Thank you for choosing us. Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Age: Kids over 10 years old. 1 X Eachine Hit & Miss Gas Engine (With Base). The item “ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Model Combustion DIY Project New” is in sale since Wednesday, October 23, 2019. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “topbazzar” and is located in China. This item can be shipped worldwide.
  • Remote Control Peripherals/Devices: Engine
  • Technical parameters: Value 10
  • Tool Supplies: Assembled class
  • Upgrade Parts/Accessories: Engine
  • Use: Vehicles & Remote Control Toys
  • Country/Region of Manufacture: China
  • Wheelbase: Bottom Plate
  • For Vehicle Type: Helicopters
  • Four-wheel Drive Attributes: Engine
  • MPN: 1168919491
  • Brand: Unbranded
  • Material: Composite Material
  • RC Parts & Accs: Engine