For your consideration is an original Crankguard for a 3HP Fairbanks Morse Z Hit Miss Gas Engine. Its about 4-3/8″ wide overall where it bolts to the cylinder, about 5-1/2″ wide on the guard at the bottom base and about 6-1/8″ wide on the extension, 5-1/2″ wide in the center, it’s just under 17 long from end to end in the center of the actual guard. It’s in original patina with some original red paint. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr.
Home
› Tag Archives › splash
31Jan
Crankguard 3HP Fairbanks Morse Z Hit Miss Gas Engine Crank Splash Guard FM Red
crankguard
Comments Off
19Sep
Crankguard Cover for 1 HP GRAY Hit Miss Gas Engine Splash Guard Cast Iron
crankguard
Comments Off
Crank Guard for 1HP GRAY. Cast iron painted red. 9 1/2 overall length tip to tip. 4 wide in the center. 3 1/8 center to center mounting holes. Nice original part in good condition ready to use. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items / gasenginetom.
06Sep
Crank Guard for 6 HP FAIRBANKS MORSE Z Hit Miss Gas Engine FM Cover Splash
crank
Comments Off
Crank Guard for 6HP Fairbanks Z. Crank guard is in good condition and ready to use. 6 HP Fairbanks Morse Z. About 6 3/4″ at the base and 5″ at rear. Sits inside the base at rear and bolts on the back of hopper toward the front. Its about 21 1/4 measured end to end straight through. Please be sure to review all of the pictures and description. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items gasenginetom.
13Jul
Crankguard 3HP Fairbanks Morse Z Hit Miss Gas Engine Crank Splash Guard FM
crankguard
Comments Off
Crank Guard for 3HP Fairbanks “Z”. Crank guard is in good condition and ready to use. 3HP Fairbanks Morse Z. Sits inside the base (5 1/2″ W) at rear and bolts on the back of hopper (4 3/8″ W) toward the front. The middle of the guard measures 5 1/2 W. Its about 17 1/4 measured end to end straight through. Please be sure to review all of the pictures and description. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items / gasenginetom.
02May
Crank Splash Guard 5HP ALAMO Empire Rock Island Hit Miss Engine Cover Part 6128
crank
Comments Off
Original Crank Guard for 5. Alamo Hit Miss Engine. Fits 5HP Alamo engine. Cast iron has pitting on mounting end – see photos. 14 1/2″ long and 5 1/8″ wide at mounting end. Mounting holes measure 7 apart on center. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine related items / gasenginetom. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gasenginetom” and is located in this country: US. This item can be shipped worldwide.
- Engine Type: Hit & Miss
- Brand: Alamo
- Material: Iron
23Apr
CRANK SPLASH GUARD for 1 1/2 HP 2 HP FAIRBANKS MORSE Z Hit Miss Gas Engine FM
crank
Comments Off
CRANK SPLASH GUARD for 1 1/2 HP – 2 HP FAIRBANKS MORSE Z. Mounts with the main bearing bolts – mounting space is approximately 7 1/2 apart on center. For use on the 1 1/2 HP or 2 HP Fairbanks Z Hit Miss Engine – not for use on the Headless Z. About 11 3/4 long overall. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine related items / gasenginetom. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gasenginetom” and is located in this country: US. This item can be shipped worldwide.
- Engine Type: Hit & Miss
- Brand: Fairbanks Morse
- Type: Crank Guard
- Model: FAIRBANKS MORSE Z
- Material: Stamped Steel
06Apr
New Galloway Hit Miss Gas Engine 6 7 Hp Crank Splash Guard Nice
galloway
Comments Off
This is a NEW Crank Guard Or Splash Guard For the 6 – 7 Hp Size… Galloway Hit & Miss Or Throttle Governed Gas Engines. This is All New, Made Out Of Cast Iron, Poured In A foundry, Professionally Drilled & Machined Ready To Put On Your Engine & Run!!! These are Made for Approx. 7-1/4″ Mounting Bolt Pattern, Approx 18″ Tall, 8 3/8″ Wide At Base, 5-3/4″ wide At The top….. These are By Far the Best Reproduction Splash Guards Available for the Galloway Engines This size. All Made in the USA With US IRON!! So Don’t miss out on your Opportunity To Get a super Nice Guard For that Galloway Gasoline Engine!!! This Item Weighs 19 LBS!! I will Do My Best To Box & Pack Everything, As I would want to receive it…… When You Receive your Item Please leave Positive feed Back As It will be Left For you & To Let Me Know it was received & You Are satisfied……. Don’t forget to Look At my other items. Or Be sure to add me to your favorites list. If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the. 1246 Us Hwy 63. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “geoffrrparts” and is located in this country: US. This item can be shipped worldwide.
- Engine Type: Hit & Miss
- Brand: Prairie Classics
- Type: Splash Guard
- Model: 6 – 7 Hp
- Material: Cast Iron
- MPN: E-16
- Country/Region of Manufacture: United States
14Mar
Original CRANKGUARD 5HP Hercules / Economy / Jaeger Hit Miss Engine Splash Guard
original
Comments Off
CRANKGUARD 5HP Hercules / Economy / Jaeger Hit Miss Gas Engine. Crankguard is in good condition and ready to use. Fits 5HP Hercules / Economy / Jaeger / Arco. Cast iron painted red. 15 1/2 tip to tip. 8 center to center mounting holes. I apologize for any inconvenience. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine related items / gasenginetom. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gasenginetom” and is located in this country: US. This item can be shipped worldwide.
- Engine Type: Hit & Miss
- Brand: Hercules Economy
- Type: Crankguard
- Model: 5HP
- Material: Cast Iron
- Country/Region of Manufacture: United States
24Dec
Original 7 Hp Nelson Bros. Hit & Miss Gas Engine Splash Shield Crank Guard FB FA
original
Comments Off
This Is a Cast Iron Splash Guard Or Crank Guard For the 7 Hp Nelson Bros. Hit & Miss Or Throttle Governed Gas Engines.. This fits a 7 Hp Nelson Bros. FB Or FA Approx. 5″ Bolt Spacing 5-1/4″ wide in the Front 7 wide On The Back… 25 1/4 Long Over all. This Is An Original Guard, ready To Put On Your Engine & Use, It would Be Great On An original engine, Or Paint it to Match Your Restoration. Don’t miss out on your opportunity to Complete that 7 Hp Nelson Bros. This Item is quite Large & Weighs 12 LBS……… I will Do My Best To Box & Pack Everything, As I would want to receive it…… When You Receive your Item Please leave Positive feed Back, As It will be Left For you & To Let Me Know it was received & You Are satisfied……. Don’t forget to Look At my other items. Or Be sure to add me to your favorites list. If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the. 1246 Us Hwy 63. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “geoffrrparts” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Sudan, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Burma, Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Western Sahara, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, British Virgin Islands, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Tuvalu, Germany, Egypt, Latvia, Jamaica, Niue, South Africa, Brunei Darussalam, Honduras.
- Engine Type: Hit & Miss
- Brand: Nelson Bros.
- Type: Guard
- Custom Bundle: No
- Model: 7 Hp
- Material: Cast Iron
- MPN: F 115
- Country/Region of Manufacture: United States
- Modified Item: No
24Dec
Crankguard 3HP Fairbanks Morse Z Hit Miss Gas Engine Crank Splash Guard FM Green
crankguard
Comments Off
For your consideration is an original Crankguard for a 3HP Fairbanks Morse Z Hit Miss Gas Engine. Its about 4-1/8″ wide overall where it bolts to the cylinder, about 5-7/16″ wide on the guard at the bottom base and about 6-1/8″ wide on the extension, 5-9/16″ wide in the center, it’s just under 17-3/8 long from end to end in the center of the actual guard. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “jtfarmengines” and is located in this country: US. This item can be shipped worldwide.
- Engine Type: Hit & Miss
- Brand: Fairbanks Morse
- Model: 3hp z