Home › Tag Archives › throttle
20Mar

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

admin fairbanks Comments Off
Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs

Good running engine, has a VERY HOT, pretty much brand new magneto. Engine starts with the flick of the flywheels on a rotary style magneto that has no impulse, so that should tell you how hot it is. These engines normally have to be started with a crank, which isn’t all that fun. Engine has great compression, and spins very smoothly – the flywheels will bounce back and forth 4 or more times after it stops from the compression. I believe this is a low hours engine. Starting chamber needle valve is not the correct needle valve. I sprayed it down with WD-40 to clean off dust, cobwebs and to be able to look them over. It won’t be all wet & shiney when they arrive. Please watch video below of the engine being started cold. It is being started with the starting chamber on the left – this was used back in the day to start on gasoline and then turn on the main needle to the fuel tank to run kerosene after the engine was warmed up. That was because Kerosene used to be cheaper then Gasoline, now its quite the opposite! Now days the starting chamber is rarely used. Notice how easy it starts, and how it runs – keep in mind its not warm (35 degrees outside) and will run better, and also the smoke will clear up when warm. ALSO, the needle valve on the starting chamber is not correct as mentioned above so the engine is running rich or lean in this clip. Once it is running off the original fuel tank or needle valve it should run like a clock. I just don’t have the time to fix the fuel tank. Fairbanks Morse Model ZC 3 HP – Cold Start on Starting Chamber – YouTube. THEY WILL CALL YOU UPON ARRIVAL. The item “Fairbanks Morse Model Z Style C 3 HP ZC Hit Miss Throttle Governed Engine Runs” is in sale since Tuesday, March 12, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “vintagefarmtoolsandmore” and is located in Portland, Oregon. This item can be shipped to United States.
  • Model: ZC 3 H.P.
  • MPN: Z
  • Country/Region of Manufacture: United States
  • Brand: Fairbanks Morse
  • Powered By: Gas
  • Type: Throttle Governed
13Mar

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

admin fairbanks Comments Off
Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2

Good running engine, has a VERY HOT, original magneto. Engine starts with the flick of the flywheels on a rotary style magneto that has no impulse, which indicates how good the magneto is and how well the engine is tuned. These engines normally have to be started with a crank, hand-turned up to speed, which isn’t all that fun, or safe. Engine has Very Good compression, and spins very smoothly – the flywheels will bounce back and forth 5 or more times after it stops from the compression. Rarely Seen with ORIGINAL Fairbanks Morse TYPE RV Magneto & wire, specially in this condition. Exhaust is not original but sounds pretty good actually…. I sprayed it down with WD-40 to clean off dust, cobwebs and to be able to look them over. It won’t be all wet & shiney when they arrive. Please watch video below of the engine being started cold. It is being started with the starting chamber on the left – this was used back in the day to start on gasoline and then turn on the main needle to the fuel tank to run kerosene after the engine was warmed up. That was because Kerosene used to be cheaper then Gasoline, now its quite the opposite! Now days the starting chamber is rarely used. Notice how easy it starts, and how it runs – keep in mind its not warm (35 degrees outside) and will run better, and also the smoke will clear up, when warm. VIDEO —> Engine smoking from it sitting tilted forward, or I put too much oil in it & cold. Fairbanks Morse ZC 3 HP – Cold Start On Starting Chamber – YouTube. THEY WILL CALL YOU UPON ARRIVAL. Most items are used and very old. They are not going to be in perfect shape. For this reason w. We are happy to answer any questions to the best of our abilities. The item “Fairbanks Morse Model Z Style C 3 HP Hit Miss Throttle Governed Engine Runs #2″ is in sale since Tuesday, March 12, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “vintagefarmtoolsandmore” and is located in Portland, Oregon. This item can be shipped to United States.
  • Powered By: Gas
  • Brand: Fairbanks Morse
  • Model: ZC 3 H.P.
  • Type: Throttle Governed
  • Country/Region of Manufacture: United States
  • MPN: Z
02Mar

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

admin 1-12 Comments Off
1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine

Here is a large old Schebler carb. There is a slight dent on the intake but I don’t think that will hurt it much. Check out the pictures and see if you need it. Thanks for looking at this listing! If you want to check out my reputation and such please feel free to google search my name. My name and address is. 14316 State Route 281. If you can find a way to talk to me with your voice you will almost always get a quick response. If you message me please try not to sound like a caveman. I have terrible grammar myself so I understand but sometimes it is very difficult to comprehend what some people write. If I make a mistake on my measurements or you feel something is not as described please let me know and I will try to make it right. I think most all of my customers with a normal level of sanity are happy. I think most people would agree that I do an extremely good job of packing items so I guess it’s worth the wait. Check out my other items. Be sure to add me to your favorites list. The item “1-1/2 SCHEBLER CARBURETOR with Throttle Old Car Tractor Gas Hit and Miss Engine” is in sale since Tuesday, January 1, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in Holgate, Ohio. This item can be shipped worldwide.
23Jan

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

admin fairbanks Comments Off
Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

I know of nothing this engine needs, other than a little fine tuning. It has nice Hardwood skids, Good fuel tank, Non original starting crank & Nice Original style Muffler. All of these are items that are usually missing. Or more pic’s please ask. Checks or M/O gladly accepted for U. I also have many parts for this style engine. If wanting to pick it up, it can stay here a reasonable length of time {up to 1 year}, as long as paid for at sale end. The item “Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine” is in sale since Wednesday, January 16, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “oldironutt” and is located in Homer, Nebraska. This item can’t be shipped, the buyer must pick up the item.
  • Powered By: Gas
  • Brand: Fairbanks Morse
  • Model: ZC 3 H.P.
  • Type: Throttle Governed
  • Country/Region of Manufacture: United States
  • MPN: Z
26Dec

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

admin fairbanks Comments Off
Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine

I know of nothing this engine needs, other than a little fine tuning. It has nice Hardwood skids, Good fuel tank, Good Muffler & Non original starting crank. All of these are items that are usually missing. Or more pic’s please ask. Checks or M/O gladly accepted for U. I also have many parts for this style engine. If wanting to pick it up, it can stay here a reasonable length of time {up to 1 year}, as long as paid for at sale end. The item “Fairbanks Morse ZC 3 HP Z C Hit Miss vintage Flywheel Throttle Governed Engine” is in sale since Friday, December 21, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “oldironutt” and is located in Homer, Nebraska. This item can’t be shipped, the buyer must pick up the item.
  • Powered By: Gas
  • Brand: Fairbanks Morse
  • Model: ZC 3 H.P.
  • Type: Throttle Governed
  • Country/Region of Manufacture: United States
  • MPN: Z
24Nov

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

admin cast Comments Off
1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine

Throttle governor for hit miss engine. Governor is in good condition and ready to use. 1 1/2 hp Fairbanks Morse Z. Bracket has #’s ZAN37A & ZAA37A On it….. Cam Gear Is Part# ZAA28C On It. Cam gear is 5 1/8 and 48 teeth. Angles teeth on the cam gear. Everything works as it should on the governor. Comes with the linkage that runs up to the carb. It is in original condition so you will probably want to cleans it up or leave as is on a dirty engine. CAST IRON unlike the zinc ones that normally break. No breaks, crack, or welds. To reach me see my profile page. I reserve the right to end item early for local sale. Give me a call if you have any questions , get contact info from the last picture. You can also check out some other engines for sale at my website “gasenginetom”. If you have any questions give me a call – Tom. If you don’t see a part you need listed, good chance I have it and haven’t gotten around to it yet so just check with me. Like I said I have done this a long time and try to list everything accurately to explain all the good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example if my measurements are wrong I would take it back. Check out my other items. Be sure to add me to your favorites list. The item “1 1/2 hp cast iron Fairbanks Morse Z throttle governor for hit miss gas engine” is in sale since Thursday, March 29, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “gasenginetom” and is located in Orient, Ohio. This item can be shipped worldwide.
  • Powered By: gasoline
  • Brand: IHC
19Nov

3/8 throttle diamond valve hit miss gas engine oilfield

admin throttle Comments Off
3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

3/8 throttle diamond valve hit miss gas engine oilfield

Diamond valve for hit miss engine. Throttle diamond valve is in good condition and ready to use. Commonly used on oilfield engines. Used on any natural gas or propane engine. Hard to find smaller size like this one. RARE part and hard to come by. I reserve the right to end item early for local sale. Give me a call if you have any questions , get contact info from the last picture. You can also check out some other engines for sale my website at gasenginetom. If you have any questions give me a call – Tom. If you don’t see a part you need listed, good chance I have it and haven’t gotten around to it yet so just check with me. Like I said I have done this a long time and try to list everything accurately to explain all the good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example if my measurements are wrong I would take it back. Check out my other items. Be sure to add me to your favorites list. The item “3/8 throttle diamond valve hit miss gas engine oilfield” is in sale since Tuesday, October 2, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “gasenginetom” and is located in Orient, Ohio. This item can be shipped worldwide.
24Sep

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

admin international Comments Off
International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine

IHC LB 3 to 5 HP Engine. Good running engine, needs fuel tank repair will include original tank. The top looks fine with the fittings just needs a new bottom soldered on. Believed to have original paint and has not often seen head cover and hopper cover. Has good hot magneto. PLEASE NOTE – Most items are used and/or are very old. They are not going to be in perfect shape. We are happy to answer any questions to the best of our abilities. The item “International Harvester IHC LB 3 5 HP Hit Miss Throttle Gas Flywheel Engine” is in sale since Friday, September 21, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “vintagefarmtoolsandmore” and is located in Scappoose, Oregon. This item can be shipped to United States.
  • Model: LB 3 – 5 HP
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United States
  • Brand: International Harvester
  • Powered By: Gas
  • Type: Hit & Miss
30Jun

Pair Webster M MM K L Magneto Bearing Plates STD Gas Engine Hit & Miss Throttle

admin pair Comments Off
Pair Webster M MM K L Magneto Bearing Plates STD Gas Engine Hit & Miss Throttle

Pair of bearing plates for the Webster. M MM K L magnetos. Made in the USA! This is for the standard shaft size of. The item “Pair Webster M MM K L Magneto Bearing Plates STD Gas Engine Hit & Miss Throttle” is in sale since Tuesday, June 19, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “zkstuff” and is located in Le Mars, Iowa. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Flywheel Supply
23Jun

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

admin lunkenheimer Comments Off
3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor

Here is an extremely difficult to find 3/4 L. Lunkenheimer carb or fuel mixer with a throttle valve. The fuel inlet pipe union piece and nut is missing and an inlet has been soldered in. It should work fine as is or would be easy to redo. Take a look at the pictures and decide if you need it! Missing fuel inlet assembly and has a piece soldered in. The air valve has a normal amount of wear. I try to list items very accurately but my opinions on condition may vary from yours. Most items will go out faster though. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. So if someone doesn’t pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven’t caught on this is supposed to be mildly funny but yet serious at the same time. If you decide you don’t want it or find another one cheaper you I won’t take it back. For example if my measurements are wrong I would take it back. So here it is. 14316 St Rt 281. Check out my other items. Be sure to add me to your favorites list. The item “3/4 L. H. LUNKENHEIMER FUEL MIXER with THROTTLE Hit Miss Gas Engine Carburetor” is in sale since Sunday, January 14, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “hitmissengine” and is located in Holgate, Ohio. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Country/Region of Manufacture: United States