For your consideration is an original 2hp Vertical Famous IHC, International Harvester, Hit Miss Stationary Engine Cam Follower push rod drive actuator. The roller doesn’t turn but the pushrod holder pivots. It doesn’t appear to have any cracks breaks or welds. The mounting hole is a 1/2″ hole inside the insert, it’s about 2″ deep. Its about 2-5/8 from center of the roller to center of the pivot. It’s a 1-5/8″ roller 17/32″ wide. It’s in original patina. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr.
This is a rather hard to find original crankcase cover/serial tag for a 3hp International Harvester vertical Famous or Titan gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind that I can see or know of. It is part number GA1577 and mounts on a 4 x 4 1/2 inch hole pattern. It has some nice original paint and all of the writing is very readable. It would look great on a nice original engine. If you’ve been looking for one don’t miss your chance on this one. It will likely be a long time before another one turns up! Let the pictures be your guide. You’ll like it.
Vertical Hit and Miss Engine Metal IC Engine with Hand Start Device Gift Collection. A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed. This is a upgraded vertical hit and miss engine. Added a mechanical water pump, cooling water tank, it can carry out water cooling cycle. Equipped with wooden base, easy placement and operation. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. The engine is fixed on the wooden base, the structure is stable and reliable. The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. 3, PRIORITY GIFT OPTION FOR MANY APPLICATIONS. The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. Or can be used as home or office ornaments. Item Name: Vertical Hit and Miss Engine. Engine Size: 180 x 125 x 220mm. Ignition Power Supply: 3.7V, 3pcs AA Batteries(Not Included). Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. 1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. 2, Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. 4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. 1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. 4, When the machine stops, the power switch should be turned. 5, Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 6, Please allow little differs due to manual measurement. 7, Kids should be accompanied by adult. What’s in the Box. 1 x Vertical Hit and Miss Engine. 1 x Engine Spare Parts Hand Start Device.
Here is an original name plate for a 3hp Vertical IHC Famous hit and miss engine. Take a look at the pictures and decide if you need it! 4″ x 4-1/2″ mounting pattern. No cracks, breaks, or welds. For questions 419 789 1159. Most items will go out faster though. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. So if someone doesn’t pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven’t caught on this is supposed to be mildly funny but yet serious at the same time. If you decide you don’t want it or find another one cheaper you I won’t take it back. For example if my measurements are wrong I would take it back. So here it is. 14316 St Rt 281. Check out my other items. Be sure to add me to your favorites list.
This is a rather hard to find original crankcase cover/serial tag for a 2hp International Harvester vertical Famous or Titan gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind that I can see or know of. It is part number G1577 and mounts on a 4 x 4 1/2 inch hole pattern. It has some nice original paint and all of the writing is very readable. It would look great on a nice original engine. If you’ve been looking for one don’t miss your chance on this one. It will likely be a long time before another one turns up! Let the pictures be your guide. You’ll like it.
Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. The engine is fixed on the wooden base, the structure is stable and reliable. The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. 3, PRIORITY GIFT OPTION FOR MANY APPLICATIONS. The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. Or can be used as home or office ornaments. 1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. 2, Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. 4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. 1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. 4, When the machine stops, the power switch should be turned. 5, Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 6, Please allow little differs due to manual measurement. 7, Kids should be accompanied by adult. What’s in the Box. 1 x Vertical Hit and Miss Engine. 1 x Engine Spare Parts Hand Start Device.
Vertical Hit and Miss Engine Metal IC Engine with Hand Start Device Gift Collection. A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed. This is a upgraded vertical hit and miss engine. Added a mechanical water pump, cooling water tank, it can carry out water cooling cycle. Equipped with wooden base, easy placement and operation. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. The engine is fixed on the wooden base, the structure is stable and reliable. The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. 3, PRIORITY GIFT OPTION FOR MANY APPLICATIONS. The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. Or can be used as home or office ornaments. Item Name: Vertical Hit and Miss Engine. Engine Size: 180 x 125 x 220mm. Ignition Power Supply: 3.7V, 3pcs AA Batteries(Not Included). Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. 1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. 2, Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. 4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. 1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. 4, When the machine stops, the power switch should be turned. 5, Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 6, Please allow little differs due to manual measurement. 7, Kids should be accompanied by adult. What’s in the Box. 1 x Vertical Hit and Miss Engine. 1 x Engine Spare Parts Hand Start Device.
Vertical Hit and Miss Engine Metal IC Engine with Hand Start Device Gift Collection. A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed. This is a upgraded vertical hit and miss engine. Added a mechanical water pump, cooling water tank, it can carry out water cooling cycle. Equipped with wooden base, easy placement and operation. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. The engine is fixed on the wooden base, the structure is stable and reliable. The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. 3, PRIORITY GIFT OPTION FOR MANY APPLICATIONS. The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. Or can be used as home or office ornaments. Item Name: Vertical Hit and Miss Engine. Engine Size: 180 x 125 x 220mm. Ignition Power Supply: 3.7V, 3pcs AA Batteries(Not Included). Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. 1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. 2, Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. 4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. 1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. 4, When the machine stops, the power switch should be turned. 5, Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 6, Please allow little differs due to manual measurement. 7, Kids should be accompanied by adult. What’s in the Box. 1 x Vertical Hit and Miss Engine. 1 x Engine Spare Parts Hand Start Device.
Vertical Hit and Miss Engine Metal IC Engine with Hand Start Device Gift Collection. A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed. This is a upgraded vertical hit and miss engine. Added a mechanical water pump, cooling water tank, it can carry out water cooling cycle. Equipped with wooden base, easy placement and operation. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. The engine is fixed on the wooden base, the structure is stable and reliable. The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. 3, PRIORITY GIFT OPTION FOR MANY APPLICATIONS. The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. Or can be used as home or office ornaments. Item Name: Vertical Hit and Miss Engine. Engine Size: 180 x 125 x 220mm. Ignition Power Supply: 3.7V, 3pcs AA Batteries(Not Included). Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. 1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. 2, Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. 4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. 1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. 4, When the machine stops, the power switch should be turned. 5, Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 6, Please allow little differs due to manual measurement. 7, Kids should be accompanied by adult. What’s in the Box. 1 x Vertical Hit and Miss Engine. 1 x Engine Spare Parts Hand Start Device.
Vertical Hit and Miss Engine Metal IC Engine with Hand Start Device Gift Collection. A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed. This is a upgraded vertical hit and miss engine. Added a mechanical water pump, cooling water tank, it can carry out water cooling cycle. Equipped with wooden base, easy placement and operation. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. The engine is fixed on the wooden base, the structure is stable and reliable. The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. 3, PRIORITY GIFT OPTION FOR MANY APPLICATIONS. The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. Or can be used as home or office ornaments. Item Name: Vertical Hit and Miss Engine. Engine Size: 180 x 125 x 220mm. Ignition Power Supply: 3.7V, 3pcs AA Batteries(Not Included). Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. 1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. 2, Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. 4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. 1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. 2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. 4, When the machine stops, the power switch should be turned. 5, Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 6, Please allow little differs due to manual measurement. 7, Kids should be accompanied by adult. What’s in the Box. 1 x Vertical Hit and Miss Engine. 1 x Engine Spare Parts Hand Start Device.
