Home
› Tag Archives › york
05Jul
Old YORK Cast Iron Belt Pulley Hit Miss Gas Engine Magneto Steam Tractor Oiler
york
Comments Off
This is a real nice original cast iron pulley for a York hit and miss gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 4 1/4 inch face and is 6 inches in diameter. It mounts to every other spoke of the flywheel with three holes 6 1/4 inches apart on center. It likely fits on several sizes of York engines so please measure your engine to be sure it works for your application. It will fit on any engine with an adapter plate. It has some original green paint on it and would look great on an unrestored engine! These original cast iron pulleys are rather tough to find in the wild or even at swap meets and they really set an engine off! They also make it possible to run belt driven implements with your engine. If you’ve been looking for one to complete a restoration here’s your chance. This one is ready to be put to work on an engine or put into your inventory for a spare. The pictures tell the story. You won’t be disappointed in any way. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in this country: US. This item can be shipped worldwide.
- Brand: York
- Country/Region of Manufacture: United States
- Country of Manufacture: United States
- Material: Cast Iron
02Jul
The York Flinchbaugh Brass Data Plate Tag Antique Gas Engine Hit Miss Last One
york
Comments Off
This is a brand NEW CUSTOM The York manufactured by Flinchbaugh mfg Co. Brass Data tag copied from an original tag. THIS IS AN ETCHED TAG AND HAS DEPTH. IT IS NOT A PRINTED TAG. I make these tags myself and take great pride and care to make sure this tag has the look and the feel of an original. Happy to say that this tag was made right here in the U. Made from 0.032 thick sheet brass. I use a process very similar to the way the original tags were made. You will be hard pressed to tell the difference in my tags and an original. This tag is ready to stamp with your engines’ specific information. Mounting holes are not drilled but they are clearly marked by the etching process. Depth of etch is consistent with original antique brass tags. This tag has 2 horizontal mounting holes with a center to center distance of approximately 3.400. IMPORTANT: Please measure your antiques’ mounting hole spacing to ensure that this tag will fit your particular application. Please see pictures for overall dimensions. Item in the pictures is what you will receive. Your tag should arrive to your door in 3 or 4 days. Custom tag quotes available. Please refer to the the last picture in this listing for custom order information to reach me. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gill-r” and is located in this country: US. This item can be shipped worldwide.
- Brand: Unbranded
- Engine Type: Hit & Miss
- Type: Antique
- Model: The York Flinchbaugh
- Material: Brass
- Country/Region of Manufacture: United States
16Apr
The York Manufacturing Co. Brass Tag Name Plate Antique Vintage Hit Miss Engine
york
Comments Off
The York Manufacturing Co. Brass Tag Name Plate Antique Vintage Hit Miss Engine. 5″ x 3″ curved. Some dings due to age. Pictures are part of the description. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “chevroletbaseball” and is located in this country: US. This item can be shipped to United States.
- Engine Type: Hit & Miss
- Material: Brass
- Type: Tag
- Brand: York
03Jul
Antique Brunner Air Compressor Flat Belt for Hit Miss Engine Utica New York
antique
Comments Off
Antique Brunner flat belt compressor for hit miss style engines. Turns over with good compression and when the port is covered with thumb creates good pressure. There are two defects, the brass plug is miss shaped (could be fixed, works fine) and some small age cracking on the oil port. Otherwise great condition little air compressor with lots of raised print casting. Make an offer, if you think think the price is too high. The item “Antique Brunner Air Compressor Flat Belt for Hit Miss Engine Utica New York” is in sale since Thursday, April 8, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Other Air Compressors”. The seller is “stout_llc” and is located in Portland, Oregon. This item can be shipped to United States.
- Model: B318
- Country/Region of Manufacture: United States
- No. B318 Size 2-1/2 x 3: Antique Vintage c1920s Air Compressor
- MPN: Does Not Apply
- Brand: Brunner MFG
- Orientation: Vertical
25Oct
Hit Miss Engine Schafer’s Little York Hit and Miss Model Gas Engine Casting Kit
miss
Comments Off
The flywheels have been turned down on the outside diameter but have not been polished. The body casting was hand picked for the best match line visually. Timing gears are included. The item “Hit Miss Engine Schafer’s Little York Hit and Miss Model Gas Engine Casting Kit” is in sale since Monday, October 23, 2017. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “harleyworks” and is located in Lincoln, Nebraska. This item can be shipped to United States.
- MPN: Does Not Apply
- Country/Region of Manufacture: United States
11Jul
Original York Gas Engine Brass Igniter Very Rare Nice Hit Miss Gas Engine
original
Comments Off
I HAVE FOR SALE AN ORIGNAL YORK GAS ENGINE BRASS IGNITER. THE ACTUAL CONDITION IS GREAT WITH THE SHAFTS BEING TIGHT AND NOT ALL SLOPPED OUT. THE FACE OF THE IGNITER AS YOU CAN SEE MUST HAVE BEEN STRUCK BY A TOOL BACK IN THE DAY, AS IT MAY HAVE BEEN STUBBORN. I THINK IT IS SAFE TO ASSUME THAT THIS IS NOT A COMMON PIECE FOUND LAYING LOOSE ON A SHELF. IF YOU HAVE A NEED FOR THIS IGNITER, CONSIDER THIS YOUR LUCKY DAY. THE IGNITER HAS A GREAT ORIGINAL PATINA AND HAS NO CRACKS/BREAKS OR WELDS. LET THIS BE THE PERFECT FINISHING TOUCHES FOR YOUR MATICULOUS YORK RESTORATION. THIS OPPORTUNITY DOES NOT COME AROUND THAT OFTEN. I will be accepting. I will try my best to give you an accurate and honest description of my items, listing the goods and the bads. Let the pictures be your guide. If there is a problem when you receive the item, contact me and I will try to do anything within my power to resolve the issue. The item “ORIGINAL YORK GAS ENGINE BRASS IGNITER VERY RARE NICE HIT MISS GAS ENGINE” is in sale since Monday, July 11, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “iceshoe73″ and is located in Mayville, Wisconsin. This item can be shipped worldwide.
28May
Lil York Hit & Miss Hit And Miss Model Engine
york
Comments Off
Nice built Lil York model hit & miss engine as shown. This is a very nice built model- untested, but moves freely and looks great. This Measures 12 inches long with the base, the engine is 8 & 1/2 inches long. The height with the base is 9 & 3/8 inches, 4 & 3/4 inches without and it is 6 & 1/4 inches wide at its widest. The item “Lil York Hit & Miss Hit And Miss Model Engine” is in sale since Sunday, May 22, 2016. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “qualityconst88″ and is located in Davenport, Iowa. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, CL, CO, CR, PA, TT, GT, HN, JM.
- Brand: Lil York
- MPN: Does Not Apply
- Country/Region of Manufacture: United States
17May
YORK SCALE MODEL CASTING KIT Hit and Miss Old Gas Engine
york
Comments Off
Here is a casting kit to make a scale model York hit and miss gas engine. I bought this kit last summer with a bunch of other stuff. As far as I can tell it is complete. This one is priced to sell for less. If you are looking at the pictures and the parts list I believe the valve cages are one casting. See picture with my fingers pointing. Check out all the pictures and decide if you need it. The flywheels castings are about 4-3/4 in diameter. I believe it is complete but check the pictures. The plans come with it. Most items will go out faster though. I have many good parts and pieces I will be listing in the next few months. I try to do a very good job of listing everything I sell in a very accurate manner to explain all the good and bad points with the pictures and in the description. So if someone doesn’t pay I will ban them from my listings and also tell all my friends who also sell engine parts on here who to watch out for. If you haven’t caught on this is supposed to be mildly funny but yet serious at the same time. If you decide you don’t want it or find another one cheaper you I won’t take it back. For example if my measurements are wrong I would take it back. So here it is. Check out my other items. Be sure to add me to your favorites list. The item “YORK SCALE MODEL CASTING KIT Hit and Miss Old Gas Engine” is in sale since Monday, January 04, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “hitmissengine” and is located in Holgate, Ohio. This item can be shipped worldwide.