This is an extremely hard to find original Webster magneto ignitor bracket for a Alamo, Rock Island, Empire, Cockshutt, Moline, or other Alamo-built hit and miss gas engine. It should fit the 2 1/2 through 12hp engines but please measure your engine to be sure it will work for you. It is bracket number 303K18 and seems to be in good shape with and old solid repair as can be seen. It will need to be rebuilt or at least reassembled before it can be used. It seems to be very solid and should be a pretty straightforward project. It mounts with two holes 2 3/4 inches apart on center and the magneto mounts on a 2 x 2 inch hole pattern. The movable electrode moves nicely with very little wear and the pics show the condition of the points (one will need to be renewed). The advance/retard lever and roller move just as they should with only slight wear on the roller. After the addition of a few minor parts and some attention this should be a good, usable ignitor. If you need an Alamo/Rock Island ignitor bracket for any reason here is a pretty decent one. The pictures tell the story. It would also make a great spare on the shelf.