Here is a scarce V-belt style clutch pulley for a Fairbanks Morse engine. It was made by WA Jones in Chicago and has the original brass tag on it. The belt pulleys are 7″ in diameter and the clutch mounts to every other spoke of the flywheel with holes about 3 7/8″ on center. The carrier has a 1 3/8 hole for the crankshaft. This clutch should fit on a 1 1/2 and 2hp Fairbanks Morse Z, a Headless Z, and a ZC enclosed crank engine. It may fit on others as well so please measure your engine to be sure it will work for you. It will fit on any engine with an adapter plate. It is in good condition but does have an ear that needs repair as can be seen. It is stuck but I’m sure with a little heat an patience it would free up as it looks just dry stuck. It should make a nice clutch for your engine. I can deliver for free (or a cold beverage) to Coolspring, PA, Baraboo, WI, or Portland, IN, later this year. These Fairbanks Morse clutch pulleys are extremely difficult to find in the wild or even at swap meets and they really set an engine off! They also make it possible to run belt driven implements with your engine. If you’ve been looking for one to complete a restoration here’s your chance. The pictures tell the story. I can be reached at 262 573 193 1 if you’d like to talk about it.