This is a real nice original cast iron crankguard or fender for a 1 1/2 or 1 3/4hp Nelson Bros Jumbo or Sattley hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It has one extra small hole which doesn’t affect anything and would be easy to remedy. It has original paint and fine pinstriping on it as can be seen. It mounts with one hole on the bottom end. This is NOT for the earlier Model P engines. Please check your notes to be sure it works for your application. These cast iron crankguards are rather tough to find in the wild or even at swap meets and they’re so often missing so if you need one here’s your chance! The pictures tell the story. You won’t be disappointed in any way.
Home
› Tag Archives › bros
17Aug
NELSON BROS JUMBO SATTLEY Crankguard 1 1/2 and 1 3/4hp Hit Miss Engine NICE
nelson
Comments Off
25Jan
Piston / Connecting Rod Nelson Bros Jumbo Model T 1 3/4 HP Hit Miss Gas Engine
piston
Comments Off
11Jan
Cylinder Water Hopper Nelson Bros Jumbo Model T 1 3/4 HP Hit Miss Gas Engine
cylinder
Comments Off
24Dec
Antique Manzel Bros Mechanical Lubricator Oiler Dual Feed Hit Miss Steam Engine
antique
Comments Off
I have for sale a older dual feed mechanical ratchet lubricator. This item is untested. I included a few pictures with the “top” removed to try and better the description on what to expect. Sight glass is unbroken, it will most likely need new gaskets though. The crank handle has a slight bend to it. The inspection glass that covers the “drip” tubes is missing. This unit does ratchet and seems to turn like it should. I would bet it wouldn’t need much to be operational. Please see all pictures for the absolute best description and keep in mind this is a well used lubricator that shows it’s age and usage.
24Dec
Original 7 Hp Nelson Bros. Hit & Miss Gas Engine Splash Shield Crank Guard FB FA
original
Comments Off
This Is a Cast Iron Splash Guard Or Crank Guard For the 7 Hp Nelson Bros. Hit & Miss Or Throttle Governed Gas Engines.. This fits a 7 Hp Nelson Bros. FB Or FA Approx. 5″ Bolt Spacing 5-1/4″ wide in the Front 7 wide On The Back… 25 1/4 Long Over all. This Is An Original Guard, ready To Put On Your Engine & Use, It would Be Great On An original engine, Or Paint it to Match Your Restoration. Don’t miss out on your opportunity to Complete that 7 Hp Nelson Bros. This Item is quite Large & Weighs 12 LBS……… I will Do My Best To Box & Pack Everything, As I would want to receive it…… When You Receive your Item Please leave Positive feed Back, As It will be Left For you & To Let Me Know it was received & You Are satisfied……. Don’t forget to Look At my other items. Or Be sure to add me to your favorites list. If You Have Any Questions Or Concerns About the Items I have listed And Prefer Not to Wait thru the. 1246 Us Hwy 63. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “geoffrrparts” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Sudan, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Burma, Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Western Sahara, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, British Virgin Islands, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Tuvalu, Germany, Egypt, Latvia, Jamaica, Niue, South Africa, Brunei Darussalam, Honduras.
- Engine Type: Hit & Miss
- Brand: Nelson Bros.
- Type: Guard
- Custom Bundle: No
- Model: 7 Hp
- Material: Cast Iron
- MPN: F 115
- Country/Region of Manufacture: United States
- Modified Item: No
24Jul
NELSON BROS 7hp Hit Miss Gas Engine FUEL MIXER Steam Magneto Oiler Carburetor
nelson
Comments Off
This is an original fuel mixer or carburetor for a Nelson Brothers or Nelson Brothers-built hit and miss gas engine. It may fit other models or sizes so please do your homework to be sure it fits your application. It is in good condition with no cracks, breaks, or repairs of any kind. The fuel needle is stuck and should come loose with some heat or electrolysis. It mounts with two holes 2 7/8 inches apart on center and the hole in the flange is 1 1/2 in diameter. I believe this is for a 7hp or possibly a 5hp but please measure your engine to be sure it works for your application. With a little effort this mixer should be ready to be used on an engine or put in your inventory as a spare. These original parts are quite tough to find in the wild or even at swap meets! If you’ve been looking for one to complete a restoration or to replace your broken or repaired one here’s your chance. The pictures tell the story. It would surely beat making one! I can be reached at 262 573 193 1 if you’d like to talk about it. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “flywheels4evr” and is located in this country: US. This item can be shipped worldwide.
- Country/Region of Manufacture: United States
- Material: Cast Iron
- Type: Fuel Mixer Carburetor
- MPN: FB11
- Brand: Nelson Brothers
28Jun
Igniter Nelson Bros. Hit miss gas engine
igniter
Comments Off
Igniter is in good condition and ready to use. 2 1/8 center to center bolt pattern. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items gasenginetom. The item “Igniter Nelson Bros. Hit miss gas engine” is in sale since Thursday, December 12, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “gasenginetom” and is located in Orient, Ohio. This item can be shipped worldwide.
- Engine Type: Hit & Miss
- Brand: Nelson Bros.
08Mar
Nelson Bros Hit and Miss Engine. 1-1/2 Hp. Gas Engine
nelson
Comments Off
Hit and Miss Engine.. Flywheels have no wobble or run out…. I do not see any cracks, breaks or welds…. Have not tried to run the engine in a few years.. This is priced at a very reasonable…. Cash or Check only…. All Sales Final and As Is… The item “Nelson Bros Hit and Miss Engine. 1-1/2 Hp. Gas Engine” is in sale since Thursday, March 5, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Stationary Engine Manuals & Books”. The seller is “antiquebarnfresh” and is located in Monroe, Michigan. This item can’t be shipped, the buyer must pick up the item.
- Brand: Nelson Brothers
- Product Type: Hit and Miss Engine
- Equipment Type: Engine
- MPN: Does Not Apply