Home
› Tag Archives › eachine
06Jan
Eachine ET6 Horizontal Hit Miss Complete Engine Model STEM Upgrade Gas Engine US
eachine
Comments Off
Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. 1x Eachine ET6 Model. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “rgmhobbies” and is located in this country: HK. This item can be shipped worldwide.
- Brand: Unbranded
23Oct
Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Toys
eachine
Comments Off
Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys Specifications: Brand: Eachine Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model Size: 180x125x125MM/7.02×4.88×4.88inch Displacement: 6CC. Cylinder diameter: 22MM/0.86inch Itinerary: 20MM/0.78inch Weight: 1610G/3.54ib Material: Brass And Stainless Steel (1cm=10mm=0.39inch) Measurement Details in the attached picture. Package included: 1x Eachine ET6 Model 1x Engine Spare Parts Start Device Features:? 100% brand new and high quality. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Engine startup steps: 1. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position) Precautions: 1. If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Notice -Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. This item is in the category “Toys & Games\Educational Toys\Science & Nature”. The seller is “callmelinlin7″ and is located in this country: CN. This item can be shipped worldwide.
- Brand: Unbranded/Generic
- MPN: lIz2513425
- Manufacturer Part Number: lIz2513425
- EAN: 8084171610505
22Oct
New Model EACHINE ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade
model
Comments Off
New Model EACHINE ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade. Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 1x Eachine ET6 Model. Please noted that your return product must be in their original packaging and the same condition as they were delivered. We usually respond within 12 hours. We guarantee that your issue will be solved quickly. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “besteey” and is located in this country: CN. This item can be shipped to United States, Australia.
- Model: EACHINE ET6 Engine
- Modified Item: No
- Country/Region of Manufacture: China
- Custom Bundle: No
- Size: 180*125*125MM
- Material: Brass And Stainless Steel
- Displacement: 6CC
- Weight: 1610G
- Itinerary: 20mm
- Type: Horizontal
- MPN: ET6
- Brand: EACHINE
- Powered By: Gas
10Sep
Eachine ET6 Horizontal Hit & Miss Complete Engine Model STEM Upgrade Gas Engine
eachine
Comments Off
EACHINE ET6 Horizontal Hit & Miss Complete Engine Model STEM Upgrade Gas Engine. Name: Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, and it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side-valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4, turn, and start the flywheel; this can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 1x Eachine ET6 Model. 1x Engine Spare Parts Start Device. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “bestbuydealz1″ and is located in this country: CN. This item can be shipped to United States.
- Model: ET6
- Modified Item: No
- MPN: ET6
- Custom Bundle: No
- Brand: EACHINE
- Powered By: Gas
- Type: Hit & Miss
06Sep
Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Toy
eachine
Comments Off
Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Toy. Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. 1x Eachine ET6 Model. 1x Engine Spare Parts Start Device. This item is in the category “Toys & Hobbies\Educational\Science & Nature\Other Science & Nature Toys”. The seller is “koki.lk2014″ and is located in this country: CN. This item can be shipped worldwide.
- Brand: Unbranded
- Cylinder diameter: 22MM.
- Size: 180*125*125MM
- Custom Bundle: No
- Itinerary: 20MM.
- Material: Brass And Stainless Steel
- Age Level: 8-11 Years, 12-16 Years, 17 Years & Up
- Modified Item: No
- Displacement: 6CC.
- Weight: 1610G
- Character Family: Toy Story
- Name: Eachine ET6 Horizontal Hit and Miss Complete Engine Model
05Sep
EACHINE ET6 Horizontal Hit & Miss Complete Engine Model STEM Upgrade Gas Engine
eachine
Comments Off
EACHINE ET6 Horizontal Hit & Miss Complete Engine Model STEM Upgrade Gas Engine. ET6 Horizontal Hit and Miss Complete Engine Model. Material: Brass And Stainless Steel. This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working. The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine. You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. 1x EACHINE ET6 Model. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “optical.sales” and is located in this country: CN. This item can be shipped to United States.
- Model: ET6
- Modified Item: No
- MPN: ET6
- Custom Bundle: Yes
- Brand: EACHINE
- Powered By: Gas
- Type: Horizontal
- Bundle Description: 1x Eachine ET6 Model\n1x Engine Spare Parts Start Device