Hit Miss Engine

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection. Description: Brand: Eachine Item No. Eachine ET1 Item Name: Full Metal Hit & Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 18012575mm(LWH) Size Of Wooden Base: 1806650mm(LWH) Cylinder Diameter: 22mm Ltinerary: 20mm Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Weight: 1610g Engine Startup Steps: 1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position) Precautions: 1. If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. Package Included: 1 X Eachine Hit & Miss Gas Engine. We are european Sellers, Most of our products are located at. China, Honk-Kong, Thailand, Usa, Israel, Netherlands, Turkey, Belgium, and azerbaijan. We are working white many suppliers from all over the world and doing our best to bring high quality products at low prices. We are always working hard to ensure your package arrives as soon as possible. United States, Canada, Netherlands, Spain, Germany, France, Japan, Republic of Korea, United Kingdom. Australia, New Zealand, Singapore. Belgium, Denmark, Finland, Ireland, Norway, Portugal, Sweden, Switzerland. Customer is responsible for the the return shippung cost. We do not accept a return of physically damaged items. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. BSD Racing BS810T 1/8 2.4G 4WD 70km/h 4S Brushless Rc Car Electric Off-Road Truc. STEM Upgrade Hit&Miss Gas Gray Engine Stirling Engine New Model 2019 Combustion. ET2 STEM Upgrade Hit & Miss Gas Engine Stirling Engine New Model Combustion 2019. Full Metal ET3 Gray Stem Combustion New Engine Hit & Miss Gas Model Science. Steam Train Model Track Locomotive Drive HO Proportion Live Included Track H qua. 12 Statue Bride of Chucky Bust Chucky Art Craft Resin Action Collectible Figure. 1/14 RC Remote Control Metal Hydraulic Excavator Model-946 Collectible Toy Gift. 1/14 RC Remote Control Metal Hydraulic Excavator Model 946 Collectible Toy Gift. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Thursday, June 6, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “masterseller4ever” and is located in Or China Our Warehouse Mainland, . This item can be shipped worldwide.

• Model: ET1
• Country/Region of Manufacture: China
• MPN: Does not apply
• Brand: Eachine
• Color: Sliver

Eachine 2019 ET1 STEM Upgrade Hit&Miss Gas Engine Stirling Model Combustion. Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. 1 X Eachine Hit & Miss Gas Engine. A Spacail order will be sent directly from the Factory. Brand: Eachine Item No. Eachine ET1 Item Name: Full Metal Hit & Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 18012575mm(LWH) Size Of Wooden Base: 1806650mm(LWH) Cylinder Diameter: 22mm Ltinerary: 20mm Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Weight: 1610g Engine Startup Steps: 1. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position) Precautions: 1. Package Included: 1 X Eachine Hit & Miss Gas Engine. Contact our customer service department today and we’ll do the job for you. We will locate your product as soon as possible. We are european Sellers, Most of our products are located at. China, Honk-Kong, Thailand, Usa, Israel, Netherlands, Turkey, Belgium, and azerbaijan. We are working white many suppliers from all over the world and doing our best to bring high quality products at low prices. We are always working hard to ensure your package arrives as soon as possible. Customer is responsible for the the return shippung cost. We do not accept a return of physically damaged items. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. LOBOT DIY Arduino 6-legged Smart RC Robot Wifi APP Control Programmable Educatio. GJS GEIO Robot Wi-Fi 5.8GHz – The First FPS Battle Bot With Visual Recognition. Horizontal Hit and Miss Complete Engine Model M90 Blue New Model. Powervision PowerDolphin 4K 1080P UHD GPS Snorkeling RC Boat Exploration Version. XIAO R Full Aluminum Alloy Manipulating Gripper Grab Robot Arm With 180° Servo F. RC Metal Robot Arm Claw Gripper For RC Models. P-47 P47 Thunderbolt 680mm Wingspan EPS Warbird RC Airplane KIT. TFL C1507 Rc Car Crawler Chassis Kit Set for D90 Parts. XIAO R DIY 6-Legged STM32 Smart Ball Shooting Walking RC Robot Educational Kit. ZD Racing 9020-V3 1/8 4WD Brushless Buggy 120A ESC 4274 Brushless Motor RC Car. STEM Temperature Difference Stirling Engine Model Car Science Discovery Toy. Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Saturday, April 13, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “masterseller4ever” and is located in Or China Our Warehouse Mainland, . This item can be shipped worldwide.

• EAN: 0804037795713
• Product weight: About 2.2kg
• Voltage: 3.5V
• Fuel: Kerosene or Gasoline
• Material: Aluminium Alloy
• Model: As a Description
• Country/Region of Manufacture: China
• Model Number: Eachine ET1
• Package Contents: 1 x Set of Assembled Accessories
• Stem From: China
• Theme: Science
• Gender: Unisex
• Color: As a Picture
• UPC: 804037795713
• MPN: Does not apply
• Brand: Stirling Engine Models
• ISBN: Does not apply

Eachine ET1 STEM Upgrade Hit&Miss Gas Engine Stirling Model Combustion -In Stock. Contact our customer service department today and we’ll do the job for you. We will locate your product as soon as possible. To confirm that this part fits your vehicle, please enter your vehicle’s details below. Description: Brand: Eachine Item No. Eachine ET1 Item Name: Full Metal Hit & Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 18012575mm(LWH) Size Of Wooden Base: 1806650mm(LWH) Cylinder Diameter: 22mm Ltinerary: 20mm Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Weight: 1610g Engine Startup Steps: 1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position) Precautions: 1. If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. Package Included: 1 X Eachine Hit & Miss Gas Engine. A Spacail order will be sent directly from the Factory. We are european Sellers, Most of our products are located at. China, Honk-Kong, Thailand, Usa, Israel, Netherlands, Turkey, Belgium, and azerbaijan. We are working white many suppliers from all over the world and doing our best to bring high quality products at low prices. We are always working hard to ensure your package arrives as soon as possible. Customer is responsible for the the return shippung cost. We do not accept a return of physically damaged items. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. STEM ET2 Upgrade Hit & Miss Gas Blue Engine Stirling Engine New Model Combustion. ET2 STEM Upgrade Hit & Miss Gas Blue Engine Stirling Engine New Model Combustion. Steam Train Model Beauty Drive Proportion Live craftsman style model Horizon 1.0. Steam Train Model Track Locomotive Drive HO Proportion Live Included Track H qua. Steam Train Model Track Locomotive Drive HO Proportion Live Included Track. Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion. Full Metal Combustion Engine Hit & Miss Gas New Model Upgrade Engine Science. CA30 Liberation 1/12 6WD RC Car KIT Vehicle Model All Metal Edition Buggy Crawle. STEM Upgrade Hit & Miss Gas Gray Engine Stirling Engine New Model ET3 Combustion. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Monday, April 22, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “masterseller4ever” and is located in Or China Our Warehouse Mainland, . This item can be shipped worldwide.

• Voltage: 3.5V
• Fuel: Kerosene or Gasoline
• Material: Aluminium Alloy
• Model Number: Eachine ET1
• Package Contents: 1 x Set of Assembled Accessories
• Model: As a Description
• Country/Region of Manufacture: China
• Stem From: China
• Theme: Science
• Gender: Unisex
• Color: As a Picture
• UPC: 804037795881
• ISBN: Does not apply
• EAN: 0804037795881
• MPN: Does not apply
• Brand: Stirling Engine Models
• Product weight: About 2.2kg

Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. 1 X Eachine Hit & Miss Gas Engine. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Sunday, May 12, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “dreamstore4u” and is located in Shanghai. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Eachine
• Powered By: Gas
• Type: Hit & Miss

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion. Use: Vehicles & Remote Control Toys. Technical parameters: Value 10. For Vehicle Type: Helicopters. Model Number: Eachine ET1. Tool Supplies: Assembled class. Remote Control Peripherals/Devices: Engine. Four-wheel Drive Attributes: Engine. RC Parts & Accs: Engine. Package Weight: 2.0kg 4.41lb. Package Size: 20cm x 10cm x 10cm (7.87in x 3.94in x 3.94in). Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. 1 X Eachine Hit & Miss Gas Engine. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We stand behind our products. We do our best to process as quickly as possible. Most orders are in transit for 30 days but some may take longer. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Sunday, May 5, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “foyerli” and is located in Shenzhen, China. This item can be shipped worldwide.

• Use: Vehicles & Remote Control Toys
• Material: Composite Material
• Technical parameters: Value 10
• For Vehicle Type: Helicopters
• Brand Name: Eachine
• Model Number: Eachine ET1
• Tool Supplies: Assembled class
• Remote Control Peripherals/Devices: Engine
• Four-wheel Drive Attributes: Engine
• RC Parts & Accs: Engine
• Upgrade Parts/Accessories: Engine
• MPN: Does not apply
• Model: Does not apply
• Brand: Does not apply

Eachine 2019 ET1 STEM Upgrade Hit&Miss Gas Engine Stirling Model Combustion. Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. 1 X Eachine Hit & Miss Gas Engine. A Spacail order will be sent directly from the Factory. Brand: Eachine Item No. Eachine ET1 Item Name: Full Metal Hit & Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 18012575mm(LWH) Size Of Wooden Base: 1806650mm(LWH) Cylinder Diameter: 22mm Ltinerary: 20mm Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Weight: 1610g Engine Startup Steps: 1. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position) Precautions: 1. Package Included: 1 X Eachine Hit & Miss Gas Engine. We are european Sellers, Most of our products are located at. China, Honk-Kong, Thailand, Usa, Israel, Netherlands, Turkey, Belgium, and azerbaijan. We are working white many suppliers from all over the world and doing our best to bring high quality products at low prices. We are always working hard to ensure your package arrives as soon as possible. Customer is responsible for the the return shippung cost. We do not accept a return of physically damaged items. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. HTRC HT206 TRI AC/DC 3X200W 3X20A 4.3 Inch LCD Touch Screen Battery Balance Char. HTRC HT208 AC/DC 420W 20A 4.3 Inch Color LCD Touch Screen Battery Balance Charge. Electric RC Submarine Boat Torpedo Assembly Model Kits DIY Extracurricular Toys. DIY 4WD ROS Smart RC Robot Car Programmable bluetooth APP Control 60mm Mecanum W. ZD Racing 9106-S 1/10 Thunder 2.4G 4WD Brushless 70KM/h Racing RC Car Monster Tr. Seek Thermal Compact PRO Compact XR Imaging Camera IR Infrared Imager -40330 N. DC12V 3A 36W Mini Lathe Milling Machine Bench Drill DIY Woodworking Power Tool. Imalent R90C CREE XHP35 HI LED Rechargeable Flashlight Searchlight 20000 Lumen. DJI Osmo Pocket 3-Axis Stabilized Handheld Camera HD 4K 60fps 80 Degree FPV Gimb. Chuwi Lapbook SE 13.3 inch Windows 10 Intel N4100 Quad-Core ROM Laptop 4GB+64GB. Orlandoo-Hunter OH32A02 1/32 4WD DIY Car Kit RC Rock Crawler Without Electronic. UBTECH Jimu 3D Programmable Creativity DIY Robot Kit Model UBT-4HD. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Friday, May 3, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “masterseller4ever” and is located in Or China Our Warehouse Mainland, . This item can be shipped worldwide.

• Fuel: Kerosene or Gasoline
• Material: Aluminium Alloy
• Model Number: Eachine ET1
• Package Contents: 1 x Set of Assembled Accessories
• Stem From: China
• Model: As a Description
• Country/Region of Manufacture: China
• Theme: Science
• Gender: Unisex
• Color: As a Picture
• UPC: 804037796260
• ISBN: Does not apply
• EAN: 0804037796260
• Product weight: About 2.2kg
• MPN: Does not apply
• Brand: Stirling Engine Models
• Voltage: 3.5V

Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: Kerosene or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that thecarburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. 1 X Eachine Hit & Miss Gas Engine. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “supergreenlight” and is located in Hok Tsui Tsuen . This item can be shipped worldwide.

• Type: Hit & Miss
• Powered By: Gas

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion. Eachine ET1 Item Name: Full Metal Hit & Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 18012575mm(LWH) Size Of Wooden Base: 1806650mm(LWH) Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Age: Kids over 10 years old. 1 X Eachine Hit & Miss Gas Engine (With Base). The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Thursday, April 4, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “leluxeforu” and is located in Hong kong. This item can be shipped worldwide.

• Tool Supplies: Assembled class
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Four-wheel Drive Attributes: Engine
• Use: Vehicles & Remote Control Toys
• Technical parameters: Value 10
• Model Number: Eachine ET1
• Material: Composite Material
• For Vehicle Type: Helicopters
• Type: Hit & Miss
• MPN: Does Not Apply
• Brand: Eachine
• Powered By: Gas