Rocker Arm for a 6 HP John Deere. New recast fully machined part. If I make a mistake on measurements or you feel something is not as described please let me know and I will try to make it right.
Home
› Tag Archives › rocker
02Jun
Antique Witte Diesel Engine Rocker Arm Assembly Hit Miss Flywheel Engine
antique
Comments Off
I believe the engine this rocker arm setup came from was a 6HP Witte engine. Please measure up your engine and compare to these before purchasing. Part numbers KD243A and KD25A. The overall length of each rocker arm is just under 7 1/4. The rocker arms do move freely on the shaft. The rocker arm rollers do not spin, they are stuck!! Please see pictures for the absolute best description. I don’t see any cracks or repairs. The flip Oilers are broken.
30May
Rocker Arm and Stand 4 HP Fairbanks Morse H T Hit Miss Old Gas Engine Motor
rocker
Comments Off
Rocker Arm and Stand 4 HP Fairbanks Morse H T Hit Miss. Rocker arm and stand are in good condition and ready to use. Fits 4HP Fairbanks T / H. Arm is 7 1/2 long p art no. 24RC mounts 4 1/2 apart on center. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list.
02May
Rocker Arm for 4 HP Headless WITTE Old Hit Miss Gas Engine Antique Original
rocker
Comments Off
Rocker Arm for 4 HP Headless Witte. Rocker arm is in good condition and ready to use. Fits 4 HP Headless Witte. 1 3/16 diameter hole. Catch block has a break – see photos. No other breaks, cracks or welds. I apologize for any inconvenience. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Be sure to check out my website for other engines and engine items. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine items gasenginetom.
17Mar
Antique Witte Diesel Engine Rocker Arm Assembly Hit Miss Flywheel Engine
antique
Comments Off
I believe the engine this rocker arm setup came from was a 6HP Witte engine. Please measure up your engine and compare to these before purchasing. Part numbers KD243A and KD25A. The overall length of each rocker arm is just under 7 1/4. The rocker arms do move freely on the shaft. The rocker arm rollers do not spin on the pins, they are stuck and do have some flat spots on them. Please see pictures for the absolute best description. I don’t see any cracks or repairs. The flip Oiler is broken.
07Mar
Fairbanks Morse Z 6hp Rocker Arm & Stand Hit Miss Stationary Engine
fairbanks
Comments Off
For your consideration is an original Fairbanks Morse Z 6hp Rocker Arm & Stand. There doesn’t appear to be any cracks, breaks or welds on the rocker or stand. The hole for the stud mount is about a 3/4 hole. It’s about 5-1/2 from center of the valve flat to center of the pushrod ball cup. The part number of the rocker is ZCA39. The rocker stand appears to be ZCA41. It’s in original patina. Please read the following full description so you understand the terms of the sale, this will save both of us time by not messaging me questions that are already answered. Please review the pictures and full description as what I’m showing in the pictures is the actual item you will be receiving, and the pictures are part of the description. The can Koozie is used as a back drop for a size comparison, it’s not included in the sale. I do NOT allow offers on my listings. Thank You for viewing, John Tonjes Jr.
02Mar
Head for 1 1/2HP IHC M Igniter Hit Miss Gas Engine with Rocker Arm 9637-T
head
Comments Off
Head for 1 1/2HP IHC M Igniter. Hit Miss Gas Engine. 3 5/8 apart on center 4 bolt mounting. 2 1/2 apart on center igniter mounting. 2 7/8 apart on center carburetor mounting. 1 1/4 NPT for exhaust. Valves and springs are loose. Rocker arm and stand are in good shape – needs a spring. No breaks, crack, or welds – Part No. Please feel free to call me with questions. My parts inventory has grown out of control, so set a reminder to check back frequently for new listings! If you don’t see a part you need listed, good chance I just haven’t gotten around to it yet, so just check with me. Like I said, I have been doing this a long time and try to list everything accurately and to provide a detailed explanation of the item, both good and the bad. If you decide you don’t want it or find another one cheaper, I won’t take it back. For example, if my measurements are wrong I would take it back. Most of my parts are listed “AS IS” and are in unknown working condition, unless otherwise stated. Check out my other items. Be sure to add me to your favorites list. Be sure to check out my website for other engines and engine related items / gasenginetom.
29Feb
ROCKER ARM for a 2-1/2HP IHC FAMOUS or TITAN Hit & Miss GAS ENGINE Part # G-7109
rocker
Comments Off
02Feb
Antique 1 3/4HP Economy XK Head & Rocker Arm Hit Miss Engine Parts GE4073A
antique
Comments Off
This head and it’s attached parts were removed from a 1 3/4HP Throttle governed XK Economy engine. As far as I can see there is no breaks or repairs done to the head but there is some things that will need some work before being put to use! I will list all the flaws that I can see below! The 1 exhaust threads are in poor shape and will need some attention and re tapped. The intake valve is stuck. Exhaust valve is loose. Ek magneto trip eccentric is stuck on the shaft it rides on. Rocker arm rotates back and fourth but is stuck on the shaft, (moves on the pedestal attached to head). The part numbers are a little hard to see but I will do my best at listing them! The part # on the head looks to read GE4073S. The part # on the Rocker arm looks to read GE4016. Carburetor mounting hole spacing is 2 1/4 on centers. The head mounting holes are spaced 3 apart from one another on centers. Please see all pictures for the absolute best description. This head will need work before being able to be put to use. It’s old and I’m used.