Home › Tag Archives › stirling

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection. Brand: Eachine Item No. Eachine ET1 Item Name: Full Metal Hit & Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 18012575mm(LWH) Size Of Wooden Base: 1806650mm(LWH) Cylinder Diameter: 22mm Ltinerary: 20mm Voltage: 3.5V Fuel: ZIPPOOil or Gasoline The best tappet clearance: 0.5mm Weight: 1610g Revolutions Per minute:1200rmp. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. An O-ring, which is not so airtight and can be started better. 1 X Eachine Hit & Miss Gas Engine. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “electronicgadgetsdeals” and is located in this country: CN. This item can be shipped worldwide.
  • Brand: Eachine
  • Type: Hit & Miss
  • Powered By: Gas

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gi

STEM Stirling Engine Full Metal Combustion Engine Hit & Miss Gas Model Engine Gift Collection. Item Name: Full Metal Combustion Engines. Fuel: ZIPPOOIL or Gasoline. The best tappet clearance: 0.5mm. Age: Kids over 10 years old. 1 × Full Metal Combustion Engines. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “optical.sales” and is located in this country: CN. This item can be shipped to United States.
  • Model: Hit & Miss
  • Modified Item: No
  • Custom Bundle: No
  • Brand: STEM
  • Powered By: Gas
  • Type: Hit & Miss

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Stirling Engine Full Metal Hit & Miss 4-Stroke Cylinder Gas Motor Working Model

Hit and Miss Engine Full Metal Single 6cc Cylinder 4-Stroke Mini Engine with Ignition Device Gift Collection. Mini Hit & Miss Engine. This is a mini horizontal Hit and Miss engine, but it has high speed and strong power. It adopts water-cooled ancient structural design and is mainly made of aluminum alloy. It is an excellent desktop model engine. The exposed gear transmission mechanism will attract more people’s attention and feel the charm of the engine’s mechanical operation. The engine is unique and beautiful, stable and reliable, and its good working performance will be more appreciated by people. Steps to start the engine. Prepare 3 AA 1.5v batteries, check the engine wiring, connect the fuel tank and the fuel pipe, and connect the battery box to power on. Fill the fuel tank with fuel. After filling, make sure that there is no air in the fuel pipe. Rotate the flywheel clockwise by hand to completely suck the mixed fuel into the carburetor. Rotate the flywheel, check whether there is spark, the cylinder is in normal compression, and everything is normal to start the engine. Check whether the piston connecting rod is at the leftmost horizontal position. Check the closing condition of the ignition switch and brass. When the two conditions are met, turn the flywheel, check that the connecting rod moves to the leftmost 0.2mm, there is spark, and it can be started. The Hit and Miss engine is a perfect supplement for model enthusiasts and collectors. It has historical sentiments. It will accompany you to spend your leisure time. At the same time, it is also suitable for birthdays and Christmas. A great personalized gift for mechanical lovers. The best tappet clearance: 0.5mm. Cooling Method: evaporative water cooling. Lubrication Method: mixed lubrication. Start Mode: pull/drill start. Power Supply Voltage: 4.2-6V. 1 Engine (including spark plug). 1 Mini fuel tank. 1 Spare Hall sensor. Answers to Questions About ENJOMOR 6cc Antique Red Hit and Miss Gas Engine. What sizes are the button head machine screws used on the 6cc model engine? I need to get a supply of the common metric sizes used on the engines. Answer: Hexagon socket head screws. The four screws of the cylinder head are M2.012mm. The ones on the side and the flywheel are all M1.510mm. Is the piston ring made of metal? Or are they made of rubber? Does it come with one spare sensor? Is there a total of two sensors, one equipped on the engine and a spare one? Does this engine work with Hit and Miss? The piston ring is made of rubber. It comes with 2 sensor. It’s a hit and miss engine. How to start this engine? I’m new to it. Please don’t change it if you are a beginner. Engine start steps: A Prepare 3 AA 1.5v batteries, check the engine wiring, connect the fuel tank tube, connect the battery box, B Fill the fuel tank with gasoline (95#). When the filling is completed, make sure that there is no air in the tubing, C Rotate clockwise by hand to make the mixed gasoline completely enter. D Rotate the flywheel, check if there is spark, the cylinder is in normal compression state, you can start. How to adjust the ignition timing? Check that the piston connecting rod is at the leftmost horizontal position (as shown in Figure 1). Check the closing condition of the ignition switch and brass (Figure 2). When both conditions are met, turn the wheel, check that the connecting rod moves to the leftmost 0.2 seconds, and there is spark, you can start the machine. (Figure 3:Throttle regulator). Ground wire and spark plug wiring (Figure 4). E Igniter and battery box (Figure 5). We are european Sellers, Most of our products are located at. China, Honk-Kong, Thailand, Usa, Israel, Netherlands, Turkey, Belgium, and azerbaijan. We are working white many suppliers from all over the world and doing our best to bring high quality products at low prices. We are always working hard to ensure your package arrives as soon as possible. A perfect gift for a close friend, and for everyone you love, is also suitable for a Christmas / birthday gift. Customer is responsible for the the return shippung cost. We do not accept a return of physically damaged items. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. New Gasoline Engine Model Hit Miss Oil Engine Oil Internal Combustion Engine Model Science and Technology Experimental Toy GIFT. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Parts”. The seller is “mastersales4you” and is located in this country: HK. This item can be shipped worldwide.
  • Model: Gas Engine
  • Country/Region of Manufacture: China
  • Engine Type: Hit & Miss
  • Material: Metal
  • Bore diameter: 120mm
  • Stroke: 20mm
  • Cooling Method: evaporative water cooling
  • Power Supply Voltage: 4.2-6V
  • Type: Hit and Miss Gas Engine
  • Color: Red
  • Engine Size: 170*125*112mm
  • Displacement: 6cc
  • The best tappet clearance: 0.5mm
  • Lubrication Method: mixed lubrication
  • Start Mode: pull/drill start
  • Age: 14+
  • Weight: 1410g
  • Brand: Unbranded

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection. Item Name: Full Metal Hit & Miss Gas Engine. Weight: About 2.2kg(Engine+Wooden Base). Size Of Engine: 18012575mm(LWH). Size Of Wooden Base: 1806650mm(LWH). Fuel: ZIPPOOil or Gasoline. The best tappet clearance: 0.5mm. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel. An O-ring, which is not so airtight and can be started better. 1 X Eachine Hit & Miss Gas Engine. The item “Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Thursday, July 15, 2021. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “agmarshop” and is located in USA. This item can be shipped worldwide.
  • Model: Eachine ET1
  • Type: Hit & Miss Gas Engine
  • Brand: Eachine

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys

Eachine ET7 Horizontal Hit and Miss Complete Gas Engine Model STEM Upgrade Engine Toys Specification: Brand: Eachine Name:Eachine ET7 Horizontal Hit and Miss Complete Gas Engine Model Material: Brass And Stainless Steel Displacement : 6CC Cylinder diameter : 22MM/0.87″ Itinerary : 20MM//0.87″ Size:approx. 180x125x125mm/7.09×4.93×4.93 Weight : 1610G (1cm=10mm=0.39inch) Measurement Details in the attached picture. Description This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine cylinder head is uniquely designed, and the valve mechanism is installed on the left side. The transmission controls the closing of the exhaust through the side gears. The flywheel on the left is equipped with a speed limiter. The engine will be more appreciated when working. You only need to add petrol to the tank and add the battery (4.5V) will be able to start it. Features: Engine startup steps 1. Open the bottom plate to check the wiring of the engine , connect thefuel tank pipe , and install the three No 5 batteries to close the bottomplate 2. Fill the fuel tank with gasoline (95). When the filling is completedmake sure there is no air in the oil pipe 3. Turn on the power switch and turn the flywheel to start the enginecounterclockwise on the right side of the engine (installing the flyinghammer position) Precautions: 1. If the ignition device is normal and the cylinder is under normalcompression , if the machine still does not start normally , it is very likelythat the carburetor needle should be adjusted 2. Screw the screw on the top of the carburetor , then loosen 1 / 4 turn , startthe flywheel , This can be done several times to make the mixing ratio of Package Included: 1x Eachine ET7 Model 1x Engine Spare Parts Start Device. Kids should be accompanied by adult. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight deviation for the measurement data. Please allow 1-3cm error. The item “ET7 STEM Upgrade Hit Miss Gas Engine Stirling Model Combustion DIY Eachine Toys” is in sale since Tuesday, March 30, 2021. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “duoyun77″ and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Color: Gold+Silver
  • MPN: aJy5295172
  • Material: Brass+Stainless Steel
  • Size: 180x125x125mm/7.09×4.93×4.93″
  • Displacement: 6CC
  • Cylinder diameter: 22MM/0.87″
  • Itinerary: 20MM//0.87″
  • Manufacturer Part Number: aJy5295172

Lets Fire Up Hit U0026 Miss Full Metal Gas Stirling Combustion Engine Eachine Et1 Review By Captain Bla

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion

Eachine ET8 Horizontal Hit and Miss Complete Gas Adjustable Speed Double Valve EngineToys. Brand: Eachine Name:Eachine ET8 Horizontal Hit and Miss Complete Gas Engine Model Size:180x125x125MM/7.02×4.88×4.88inch Flywheel diameter 56mm/2.19in, thickness 15mm/0.59in Displacement: 6CC. Cylinder diameter: 22MM/0.86inch Itinerary 20MM/0.78in Weight: 1610G Material: Brass And Stainless Steel. (1cm=10mm=0.39inch) Measurement Details in the attached picture. This is a miniature engine. It is made of brass, aluminum alloy and stainless steelWater-cooled cooling structure. A carburetor with adjustable speed is used. Thegnition device is powered by a 4. Its starting method: manual start by external force. Note: We will test and package each engine after it works normally. Its carburetor isdebugged to the best working position. So it is not recommended to make largeadjustments! 1x Eachine ET8 Model 1x Engine Spare Parts Start Device. 100% brand new and high quality. Engine startup steps: 1. Check the wiring of the engine from the board, connect the fuel tank pipeline, andinstall three No 5 batteries 4. Add water to the engine water tank. Use gasoline(95#)to fill the fuel tank. After thefilling is completed, turn the flywheel clockwise on the right side of the engine formany turns. Its function can make the mixed fuel fully enter the cylinder. Make surethe fuel pipe No air can be generated. Turn on the power switch and quickly rotate the flywheel clockwise on the right sideof the engine to start the engine. If the ignition device is normal and the cylinder compression is normal, if themachine cannot start normally, it is very likely that the carburetor oil needle needs tobe adjusted. After tightening the main oil needle on the carburetor, loosen 1/4 turn and start theflywheel, so that the mixing ratio of gasoline and air can reach the normal workingmixing ratio. When the machine is stopped, the power switch should be turned off. Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “Eachine ET8 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion” is in sale since Monday, August 16, 2021. This item is in the category “Toys & Hobbies\Educational\Other Educational Toys”. The seller is “greatislandy” and is located in Alloway, New Jersey. This item can be shipped to United States, Canada.
  • Brand: Unbranded/Generic
  • Type: Eachine ET8
  • Color: Multicolor
  • Size:: 180x125x125MM/7.02×4.88×4.88inch
  • Flywheel diameter: 56mm/2.19in, thickness 15mm/0.59in
  • Displacement:: 6CC.
  • Cylinder diameter:: 22MM/0.86inch
  • Itinerary: 20MM/0.78in
  • Material:: Brass And Stainless Steel
  • MPN: aZC9455751
  • Manufacturer Part Number: aZC9455751

Solar Powered Stirling Engine

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US

Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection. Eachine ET1 Item Name: Full Metal Hit Miss Gas Engine Color: Sliver Material: Aluminium Alloy Weight: About 2.2kg(Engine+Wooden Base) Size Of Engine: 180x125x75mm/7.02×4.88×2.93inch Size Of Wooden Base: 180x66x50mm/7.02×2.58×1.95inch Voltage: 3.5V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Age: Kids over 10 years old. (1cm=10mm=0.39inch) Measurement Details in the attached picture. 1 X Eachine Hit & Miss Gas Engine (With Base) Features: 100% brand new and high quality. Teaching will be more intuitive and more interesting. Student can understand it quicker and better. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries. Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there’s no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position). If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it’s very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. Please allow slight deviation of measurement due to manual measurement. Due to different monitors and different light, the picture may not reflect the actual color of the item. Please consider the actual sizes shown in the listing as the pictures are generally enlarged to show detail. If you have any questions, please let us know. The item “Eachine ET1 STEM Upgrade Hit Miss Gas Engine Stirling Engine Model Combustion US” is in sale since Thursday, May 20, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Stationary Engines\Engines”. The seller is “homesale_estore” and is located in Shenzhen. This item can be shipped worldwide.
  • MPN: ZkQ8386628
  • Brand: Unbranded/Generic
  • Type: Gas Engine Hit & Miss
  • Powered By: Gas
  • Model: Eachine ET1
  • Use: Vehicles & Remote Control Toys
  • Manufacturer Part Number: ZkQ8386628

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model

Hit & Miss Gas Vertical STEM Engine Stirling Engine Model Upgraded Version Water Cooling Cycle Engine Collection. Assembly All-Metal Car Mini Assemble Inline. STEM Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection DIY Project. Engine Model Kit Toys For Adult Best Gift Education. Very suitable as a GIFT. Total Weight of Packaging: 2200G. Revolutions Per minute:1200rmp. Ignition Power Supply: 3.7V, 3pcs AA Batteries(Not Included). This is a vertical engine, we have upgraded, added a mechanical water pump, cooling water tank, it can carry out water cooling cycle. There are exhaust pipes. 1 x Hit & Miss Vertical STEM Engine Upgraded Model. 1 x Engine Spare Parts Hand Start Device. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate. Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe. Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine. Flywheel inner pulley can realize functions such as power generation or pump pumping. The outer pulley is easy to start by hand. If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio. Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. When the machine stops, the power switch should be turned. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Please allow little differs due to manual measurement. Kids should be accompanied by adult. High quality in EU and US quality standard converse : 1 inch = 2.54cm or 1cm = 0.393 inch. Your orders will be sent out with available tracking numbers within 24h – 48 hours NORMALLY once we confirmed your payments. Yes, we will offer you the best discount or wholesaler price if your order is large. Differences in color may be caused by some other reasons such as color reflection in the monitor, lighting, background etc. We do our best to serve our each customer the best that we can. Merchandise which is damaged or missing components is not refundable. ToYAn ENGINE Kids Educational Engine Models FS-L200 2 Cylinder Four Stroke Nirto RC Engine For Remote Control RC Car Boat Plane RC Vehicles Model Engine FS-L200 2 Cylinder Four Stroke Nirto RC Engine For Remote Control RC Car Boat Plane RC Vehicles 4 cylinder engine model Model TOYAN FS-L400 Engine Four Cylinder 4 Stroke In-Line Water Cooled Nitro RC Model Innovative Stirling engine Four cylinder engine metal mechanical assembly model Full Metal Assembled Four-cylinder Inline Gasoline Engine Model Building Kit DIY Assembled Inline Four-cylinder Engine Model L4 Movable Educational Toy All-Metal Car Mini Assemble Inline Four-Cylinder Engine Model Toys For Adult All Metal Assembly Four Cylinder Automobile Engine Model Building Block Set Toy Gasoline Engine Inline Four-cylinder Model Inline Four Cylinder Engine Rc Car Full Metal Assembled Four-cylinder Inline Gasoline Engine Model Building Kits. ToYAn ENGINE Modelos de motores educativos para niños FS-L200 Motor Nirto RC de 2 cilindros y cuatro tiempos para control remoto Coche RC Barco Avión Modelo de vehículos RC Motor FS-L200 Motor Nirto RC de 2 cilindros y cuatro tiempos para control remoto Coche RC Barco Avión Vehículos RC Modelo de motor de 4 cilindros Modelo TOYAN FS-L400 Motor de cuatro cilindros y 4 tiempos en línea Nitro refrigerado por agua Modelo RC Innovador motor Stirling Motor de cuatro cilindros modelo de ensamblaje mecánico de metal Completo ensamblado de metal de cuatro cilindros en línea Modelo de motor de gasolina Kit de construcción Bricolaje ensamblado Motor de cuatro cilindros en línea Modelo L4 Móvil Juguete educativo Coche completamente metálico Mini ensamblaje en línea Modelo de motor de cuatro cilindros Juguetes para adultos Ensamblaje de metal de cuatro cilindros Modelo de motor de automóvil Juego de bloques de construcción Motor de gasolina de juguete Modelo de cuatro cilindros en línea Motor de cuatro cilindros en línea Coche Rc Completo metal ensamblado de cuatro cilindros en línea Gasolina Kits de construcción de modelos de motor. ToYAn ENGINE FS-L200 2- Nirto RC RC RC FS-L200 2- Nirto RC RC RC 4- TOYAN FS-L400 4- Nitro RC DIY L4 – Rc. TOYAn MOTOR Kinderen Educatief Motor Modellen FS-L200 2 Cilinder Viertakt Nirto RC Motor Voor Afstandsbediening RC Auto Boot Vliegtuig RC Voertuigen Model Motor FS-L200 2 Cilinder Viertakt Nirto RC Motor Voor Afstandsbediening RC Auto Boot Vliegtuig RC Voertuigen 4 cilinder motor model Model TOYAN FS-L400 Motor Viercilinder 4-takt in-line watergekoelde Nitro RC-model Innovatieve Stirling-motor Viercilindermotor metalen mechanische montagemodel Volledig metalen geassembleerde viercilinder-inline benzinemotor Modelbouwset DIY-gemonteerde inline-viercilindermotor Model L4 beweegbaar Educatief speelgoed All-Metal Car Mini Assembleren Inline Viercilinder Motor Model Speelgoed Voor Volwassen Alle Metalen Montage Vier Cilinder Automobiel Motor Model Bouwsteen Set Speelgoed Benzinemotor Inline Viercilinder Model Inline Viercilinder Motor Rc Auto Full Metal Gemonteerd Viercilinder Inline Benzine Bouwpakketten voor motormodellen. ToYAn-MOTOR Børnepædagogiske motormodeller FS-L200 2-cylindret firetakts Nirto RC-motor til fjernbetjening RC-bilbådsfly RC-køretøjer Modelmotor FS-L200 2-cylindret firetakts-Nirto RC-motor til fjernbetjening RC-bilbådsfly RC-køretøjer 4-cylindret motormodel Model TOYAN FS-L400 Motor Firecylinder 4-takts In-Line Vandkølet Nitro RC Model Innovativ Stirling-motor Firecylindret motor metalmekanisk monteringsmodel Fuldmetal Samlet Fire-cylindret indbygget benzinmotor Modelbygningssæt DIY Monteret Inline Firecylindret motor Model L4 Bevægelig Uddannelseslegetøj Mini-metalbil Mini Saml Inline Firecylindermotormodel Legetøj Til Voksen Alt Metal Montering Fire Cylinder Automotormodel Byggesten Sæt Legetøj Benzinmotor Inline Firecylindret Model Inline Fire Cylinder Motor Rc Bil Fuld Metal Samlet Firecylindret Inline Benzin Motormodelsæt. ToYAn ENGINE Modèles de moteurs éducatifs pour enfants FS-L200 Moteur Nirto RC 2 cylindres à quatre temps pour télécommande Avion de bateau de voiture RC Modèle de véhicules RC Moteur FS-L200 Moteur Nirto RC 2 cylindres à quatre temps pour télécommande Avion de bateau de voiture RC Véhicules RC Modèle de moteur 4 cylindres Modèle TOYAN FS-L400 Moteur quatre cylindres en ligne 4 temps Refroidi à l’eau Nitro RC Modèle Moteur Stirling innovant Modèle d’assemblage mécanique en métal pour moteur à quatre cylindres Modèle de moteur à essence en ligne à quatre cylindres assemblé entièrement en métal Kit de construction de modèle de moteur à quatre cylindres en ligne assemblé DIY L4 Mobile Jouet éducatif voiture tout en métal Mini assembler des jouets de modèle de moteur à quatre cylindres en ligne pour adultes Assemblage tout en métal Kits de construction de modèles de moteur. ToYAn ENGINE Kids Educational Engine Models FS-L200 2-Zylinder-Viertakt-Nirto-RC-Motor für Fernbedienung RC-Auto-Bootsflugzeug RC-Fahrzeuge Modell-Motor FS-L200 2-Zylinder-Viertakt-Nirto-RC-Motor für Fernbedienung RC-Auto-Bootsflugzeug RC-Fahrzeuge 4-Zylinder-Motormodell Modell TOYAN FS-L400 Motor Vierzylinder-4-Takt-Reihen-Wassergekühltes Nitro-RC-Modell Innovativer Stirling-Motor Vierzylinder-Motor aus Metall mechanisches Montagemodell Vollmetallmontierter Vierzylinder-Reihen-Benzinmotor Modellbausatz DIY Zusammengebauter Reihen-Vierzylinder-Motor Modell L4 Beweglich Pädagogisches Spielzeug Ganzmetallauto Mini Zusammenbauen Inline-Vierzylindermotor-Modell Spielzeug für Erwachsene Ganzmetallmontage Vierzylinder-Automobilmotor-Modellbaukasten-Set Spielzeug-Benzinmotor Inline-Vierzylinder-Modell Inline-Vierzylindermotor Rc-Auto Vollmetallmontierter Vierzylinder-Inline-Benziner Motormodellbausätze. TOYAN FS-L200 2 Nirto RC RC RC FS-L200 2 Nirto RC RC RC 4 TOYAN FS-L400 4 RC DIY L4 Rc. TOYAn ENGINE Modelli di motori educativi per bambini FS-L200 Motore a 2 cilindri a quattro tempi Nirto RC per telecomando Aereo per barche RC Veicoli RC Modello motore FS-L200 Motore a 2 cilindri a quattro tempi Nirto RC per telecomando Aereo per auto a motore RC Veicoli a 4 cilindri Modello di motore a 4 cilindri Modello TOYAN FS-L400 Motore a quattro cilindri 4 tempi in linea raffreddato ad acqua Nitro Modello RC Innovativo motore Stirling Motore a quattro cilindri in metallo modello di assemblaggio meccanico Full Metal Assemblato Quattro cilindri in linea Motore a benzina Kit di costruzione di modelli Motore a quattro cilindri in linea assemblato fai-da-te Modello L4 mobile Giocattolo educativo Auto interamente in metallo Mini Assemblare in linea Modello di motore a quattro cilindri Giocattoli per adulti Tutto in metallo Assemblaggio a quattro cilindri Modello di motore automobilistico Set di blocchi giocattolo Motore a benzina Modello in linea a quattro cilindri Motore in linea a quattro cilindri Auto Rc Assemblato in metallo Benzina a quattro cilindri in linea Kit per modellismo motore. The item “Vertical Hit & Miss Gas Engine assembly kits Educational Stirling Engine Model” is in sale since Monday, July 5, 2021. This item is in the category “Toys & Hobbies\Models & Kits\Tools, Supplies & Engines”. The seller is “sajgee77″ and is located in Hong Kong. This item can be shipped worldwide.
  • Features: Kit
  • Custom Bundle: Yes
  • MPN: Does Not Apply
  • Age Level: 12-16 Years
  • Modified Item: Yes
  • Scale: 1:35
  • Year: 2021
  • Brand: Unbranded
  • Character Family: no
  • Type: Engine